Council archive · source document
Appendix A - Code Assessment · MCU22/0207
constructed for the sole purpose of providing associated walkway is 1.5 metres, except on
access to vessels and are sited and designed to Noosa North Shore.
avoid— AO13.2 Not applicable
For jetties on Noosa North Shore, the maximum The subject property is not on Noosa North
1. cluttering of waterways; width of the jetty head is 2 metres. Shore.
2. excessive traffic volumes within AO13.3 Complies
foreshore areas and adjoining lands; The maximum length of a jetty head is not more The proposed jetty is 7m long.
3. conflicts with uses on the foreshore than 7 metres.
and adjoining lands; and
4. unacceptable risks to personal and AO13.4 Not applicable
public safety. A pontoon head has a maximum width of 3 metres A pontoon is not proposed.
and a maximum length of 5 metres (Refer Figure
9.4.9.3C).
AO13.5 Not applicable
For “Y” and “T” shaped jetty heads— No such jetty heads are proposed.
1. a maximum area 10.5m² excluding
any walkway is provided; and
2. a walkway with a minimum length of
3 metres is provided (Refer Figure
9.4.9.3D).
AO13.6 Can comply
Gangways and walkways serving jetties and Council may condition if required.
pontoons have at least one rigid handrail fitted
and meet the following—
1. for dwelling houses – a minimum
width of 750 millimetres and a
maximum width of 1.5 metres;
2. for other residential uses –
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix A - Code Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 453 KB (small file)
- File type
No other editions are linked here.