Council archive · source document
Appendix A - Code Assessment · MCU22/0207
a) the gangway for a single berth
pontoon has a minimum width of
900 millimetres;
b) the gangway for a multiple berth
pontoon has a minimum width of
1.2 metres if fitted with one
handrail and 900 millimetres if
fitted with a handrail on each
side;
c) the primary walkway to multiple
berth pontoons has a maximum
width of 1.5 metres; and
d) the maximum width of a gangway
is 1.5 metres.
AO13.7 Complies
In Noosa Sound, where quaylines are set, a jetty or Quayline is set at 12m. The proposed jetty +
pontoon does not extend into the watercourse landing extends maximum 10m.
beyond the quayline;
OR
AO13.8 Not Applicable
Where no quaylines are set, the maximum See above
distance a jetty or pontoon extends into the
watercourse is 10m, unless it can be
demonstrated that a distance in excess of 10m is
essential to safely access a vessel from the jetty.
Editor’s Note— The quayline is measured from
real property boundary except where a relevant
State Government Authority permits the
measurement from High Water Mean Springtide.
AO13.9 Can comply
All attachments to jetties, including but not
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix A - Code Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 453 KB (small file)
- File type
No other editions are linked here.