2019-06-05 Special Meeting Agenda

SPECIAL COMMITTEE MEETING REPORT                                                         5 JUNE 2019


         MATERIALS ON-SITE                                      DESTINATION
                                                     Re-use and Recycling                  Disposal
         Expected waste      Estimated     On-site              Off-site               *specify
         materials           volume(m³)    *specify proposed    *specify contractor    contractor and
                                           re-use or on-site    and recycling outlet   landfill site or
                                           recycling methods                           other disposal
                                                                                       site
        Excavation
        material
        Green waste
        Bricks
        Concrete
        Timber-please
        specify
        Plasterboard
        Metals - please
        specify
        Asbestos
        Other - please
        specify
       Note * If a demolition contractor is undertaking works, then the Waste Management table is to be
       completed by the demolition contractor.
Waste Storage
51.    The developer must provide waste storage and disposal facilities in accordance with
       Planning Scheme Policy 9, Waste Management, including an external imperviously paved
       area correctly sized for all refuse and recycling containers and suitably screened from public
       places and neighbouring properties.
52.    A bin wash area is required with a cold-water tap, hose and drain outlet connected to sewer,
       via a bucket trap. The drain outlet is to be designed to prevent storm water entry to the
       sewerage system which can be achieved by a bunded area, with a nib wall height of 100mm
       maximum, enclosing a wash area of 700mm x 700mm minimum (max 0.7m²). Alternatively,
       the waste area can be roofed, or any other appropriate design approved by Council.
Noise
53.    Upgraded building envelope constructions and the provision of mechanical ventilation/air
       conditioning which achieves the ventilation requirements of the Building Code of Australia,
       in accordance with the Second Joint Report of Experts in Noise (30 May 2018) for Planning
       and Environment Court Appeal 4066 of 2017, including:
        i.   the facades of the Visitor accommodation Type 4 motel building facing towards the IGA
             building and IGA carparking area;
      ii.    the facades of the Visitor accommodation Type 4 dwelling units facing towards the IGA
             building; and
      iii.   the facades of the Visitor accommodation Type 4 dwelling units facing towards the hotel
             building, drive-through access road and drive-through bottleshop, and carparking
             areas.
54.    Prior to the commencement of use written certification is required from a suitably qualified
       person confirming that upgrades to the building facades and provision of mechanical
       ventilation/air conditioning comply with the recommendations of the Second Joint Report of
       Experts in Noise (30 May 2018) for Planning and Environment Court Appeal 4066 of 2017.
55.    Prior to the commencement of any use or sealing of Plan of Survey, whichever occurs first,
       an acoustic screen must be constructed around the IGA rooftop mechanical plant to a height
       of 3.0 metres above the roof level plant deck, as shown on Figure 4 and described in Section
       4.6 of the Second Joint Report of Experts in Noise (30 May 2018) for Planning and
       Environment Court Appeal 4066 of 2017.
                                                                                        Page 54 of 58