Original source · versioned page text
B - Code Compliance
Waterways Works Code
b) a walkway with a minimum length of 3 metres is
provided to the jetty head (Refer Figure 9.4.9.3D).
AO19.3
Jetties have independent support structures and are not
supported by the revetment wall.
AO19.4
Seep holes in the revetment wall are not obstructed by
any jetty.
AO19.5
For lots comprising a dwelling house or dual occupancy,
a maximum of one jetty per development is constructed.
AO19.6
Multiple dwellings with common property along the
waterway frontage meet the following—
a) a maximum of 2 jetties per multiple dwelling;
b) jetties are shared between unit owners;
c) a minimum of 20 metres separation is provided
between each jetty;
d) the jetty is setback a minimum of 3 metres from the
prolongation of boundaries; and
e) jetty heads and pontoons are not constructed (Refer
Figure 9.4.9.3F).
AO19.7
For multiple dwellings where each unit has its own
individual canal frontage—
a) a joint application with the adjoining owner is made;
and
b) jetties are constructed as follows—
i. the jetty is shared between two unit owners;
ii. the jetty straddles the common boundary of the
two units;
iii. jetty heads and pontoons are not constructed;
and
iv. fencing between the two properties is setback a
minimum 1 metre from the revetment wall to
allow for efficient access to the jetty by both
owners (Refer Figure 9.4.9.3G).
Preview the original
The page text is free to read. Previews and downloads of original files need an account.
Log in to previewLog in to download the original (B - Code Compliance.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.