Council archive · source document
Decision Notice - Minor Change - MCU19 0008 02 [As Published] · MCU19/0008.02
24. Earthworks required on site must be carried out in accordance with Council’s Planning
Scheme Policy PSP5 Engineering Design Standards, so as not to cause the additional
ponding of water on any adjoining lands or concentrate or direct overland flow on to an
adjoining property.
Geotechnical Stability
25. All works must be carried out in accordance with the recommendations contained in Pacific
Geotech’s Geotechnical Stability Assessment: Version 3 (PG-2096) dated March 2023.
26. Certification must be submitted to Council from a suitably qualified person* which certifies
that the development has been constructed in accordance with the recommendations
contained in Pacific Geotech’s Geotechnical Stability Assessment: Version 3 (PG-2096)
dated March 2023. *(Refer to advisory note)
27. Deleted.
5. REFERENCE DOCUMENTS
Plan No. Rev. Plan/Document Name Date
32288-OW2.1 - Driveway & Access Plan, prepared by SCG December
Consulting 2022
32288-SW1.1 - Stormwater Management Plan, prepared by SCG December
Consulting 2022
32288-OW3.1 - Earthworks Plan, prepared by SCG Consulting February 2023
PG-2096 V3 Geotechnical Stability Assessment, prepared by March 2023
Pacific Geotech Consulting Geotechnical
Engineers
6. REFERRAL AGENCIES
Not Applicable.
7. ADVISORY NOTES
The following notes are included for guidance and information purposes only and do not form part
of the assessment manager conditions:
Building and Construction Industry (Portable Long Service Leave) Levy
1. The QLeave levy must be paid prior to the issue of a development permit where it is required.
Council will not be able to issue a Decision Notice without receipt of details that the Levy has
been paid. QLeave contact: 1800 803 481 (free call) or (07) 3212 6855.
Infrastructure Charges
2. This Development Permit will not trigger an “Infrastructure Charge Notice” to be issued in
accordance with Council’s “Charges Resolution” made pursuant to the planning legislation
and regulations current at the time of issue.
Geotechnical
3. For the purpose of preparing a Geotechnical Report, and for certifying geotechnical stability
for the development, a qualified person is considered to be a person who:
f. is a Registered Professional Engineer of Queensland (RPEQ); and
g. has a degree in civil engineering or engineering geology; and
h. has a minimum of 5 years experience in the field of geotechnical engineering or
engineering geology.
Page 5 of 8
Document Set ID: 22438820
Version: 3, Version Date: 26/05/2023
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Decision Notice - Minor Change - MCU19 0008 02 [As Published].pdfRelated documentApplication case desk ↗
About this file
- File size
- 165 KB (small file)
- File type
No other editions are linked here.