Original source · versioned page text
Appendix C - Stormwater Management Plan
Attached to the e-mail MCU15/0095 & REC15/0022 Development Application Stormwater Mgmt Plan (2 of 3).
Original PDF page 55, section 1. The text section number identifies this passage in the reader.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnOilSET-1000 Oil Separator Alarm Device D15383Be
Installation and Operating Instructions
2.2 SET/DM3D probe
SET/DM3D probe should be installed as described in figure 3.
The probe gives an alarm earliest when the upper electrode is in oil
and latest when the probe is totally immersed in a non-conductive
liquid - in other words, it is totally away from the water.
Please check the correct installation depth also from the instructions
of the oil separator.
2.3 Cable joint
Fig. 4 Cable joint SK-3-2500
Connections of the probe cable inside the cable joint are explained in
figure 3. Cable shields and possible excess wires need to be
connected to the same point in galvanic contact.
Please make sure, that the probe and cable between OilSET-1000
control unit and the probe do not exceed the maximum allowed
electrical parameters – see chapter 7 Technical data.
IP rating of the cable joint is IP67. Make sure, that the cable joint is
closed properly.
If the probe cable must be extended and there is a need for
equipotential grounding, it should be done with the junction box LJB2.
The cabling between the OilSET-1000 control unit and the junction
box should be done with a shielded twisted pair instrument cable.
Fig. 5. Cable installation example Fig. 6. Installation accessories
Copyright © 2010 5/10 We reserve the right for changes without notice
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLarge file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.