Original source · versioned page text
2014-11-11 Planning & Organisation Committee Agenda
The original of this document is very large (18.5 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
PLANNING & ORGANISATION COMMITTEE MEETING AGENDA 11 NOVEMBER 2014
RECOMMENDATION
That Council note the report by the Senior Development Planner to the Planning &
Organisation Committee Meeting dated 11 November 2014 regarding Application No.
MCU14/0067 for a Development Permit for a Material Change of Use for an Industrial
Business – Type 1 Warehouse (Self Storage) situated at 77 Rene Street, Noosaville and
approve the application in accordance with the following conditions:
PLANNING
When Conditions must be Complied With
1. Unless otherwise stated, all conditions of this Decision Notice must be complied with
prior to the use commencing, and then compliance maintained at all times while the
use continues.
Approved Plans
2. Development undertaken in accordance with this approval must generally comply with
the approved plans of development. The approved plans are listed below and as may
be amended by the conditions herein.
Plan No. Rev. Plan/Document Name Date
S8166-MS01 A Master Site Plan prepared by Milanovic 20/08/14
Neale Consulting Engineers
WD-03.01 C Proposed Floor Plan – Ground prepared February 2014
by Elevation Architecture Studio
February 2014
WD-03.02 C Proposed Floor Plan – First prepared by
Elevation Architecture Studio
February 2014
WD-03.04 A Proposed Roof Plan prepared by
Elevation Architecture Studio
20/08/2014
SK-03.02 C 3D Views prepared by Elevation
Architecture Studio
20/08/2014
SK-04.01 B Proposed Elevations prepared by
Elevation Architecture Studio
Nature and Extent of Approved Use
3. No external storage or use areas are approved on the site.
4. Any display and retail sale of goods must remain an ancillary component to the
approved use and must not exceed an area of 100m2.
Built Form
5. The building must incorporate a minimum of 600mm eaves to at least 75% of the
perimeter of the building. Amended plans demonstrating compliance must be
submitted to Council prior to the issue of a Development Permit for Operational Works.
Building Height
6. The maximum height of the development must not exceed 8metres above the finished
ground level and the natural ground level.
Page 34 of 129
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.