2015-11-10 Planning & Organisation Committee Agenda

PLANNING & ORGANISATION COMMITTEE MEETING AGENDA                            10 NOVEMBER 2015


ENGINEERING
      External Works
10.   That part of Top Forestry Road extending from the intersection with Old Ceylon Road to the
      entrance to the site must be upgraded. The works must be undertaken in accordance with
      an Operational Works approval and must include in particular:
      a.   Widening and sealing of the existing road pavement to a width sufficient to allow two
           heavy vehicles to pass. The new formation must be sufficient to cater for the
           expected vehicles
      b.   The works must be approved, completed and accepted “On Maintenance” for a
           minimum maintenance period of 52 weeks for roadworks, stormwater drainage and
           frontage works as set out in section 5.5 of “Planning Scheme Policy 5 – Engineering
           Design Standards – Roads, Drainage and Earthworks” in effect at the
           Commencement Date, prior to the commencement of the use for Animal Husbandry -
           Type 2 (Intensive Poultry Farm).
      c.   The upgrading of Top Forestry Road must be provided by the applicant/owner
           generally in accordance with the plans prepared by Lambert & Rehbein contained in;
           i.     B14101-SK-0004 (Rev B) dated 8/5/2015
           ii.    B14101-SK-0005 (Rev C) dated 28/4/2015
           iii.   B14101-SK-0006 (Rev A) dated 6/1/2015
           iv.    B14101-SK-0007 (Rev A) dated 6/1/2015
      d.   The works shall extend from the proposed entrance to the site to the existing
           formation at Old Ceylon Road, including the following amendments:
           i.     Plan No. B14101-SK-004 (Rev B) dated 8/5/2015
                  a.   Delete the table titled “Review of Existing Road Width vs Required 6m
                       Road Width of Suitable Pavement Material”
                  b.   Include additional notes
                       1. “The unbound pavement must extend beyond the formation width into
                          the 1 on 4 shoulder where necessary”,
                       2. “The final design of the pavement must be undertaken in accordance
                          with the conditions of the operational works approval”,
                       3. “Table drains to be widened at cross drainage culverts where
                          necessary”,
                       4. “The road must be constructed with a minimum 6m wide sealed
                          surface.”, and
                       5. The sealed surface must be widened where required at the bends (a
                          minimum of 7m wide at the major bend at approximately Ch1100 to
                          ch1200).”
                  c.   Clearly indicate the full extent of the proposed banks and batters.
           ii.    Plan No. B14101-SK-005 (Rev C) dated 28/4/2015
                  a.   Include additional notes
                       1. “The pavement designs shown on the engineering drawings are not
                          approved. The final design of the pavement must be undertaken in
                          accordance with the conditions of the operational works approval“,




                                                                                  Page 22 of 201