Original source · versioned page text
Attachment A Orginal approval and master plans
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnNOOSA COUNCIL IDAS Development Application Decision Notice 5
The land application area shall also be positioned at least 15 metres from any underground rainwater
tanks.
Earthworks
26. Filling works required on site shall be carried out in accordance with Section 3.8 of Council's Engineering
Design Standards Manual and so as not to cause the ponding of water on any adjoining lands or the
blockage of, or interference with, any natural watercourses.
27. Existing spoil stored on site will be spread on site and grass seeded, stabilised and protected from
stormwater runoff, or removed from the site.
Erosion and Sediment Control
28. Any person acting on this permit shall prevent erosion and sediment export from leaving the site. Site
control measures such as silt fencing, controlled gravel access to the site and controlled disposal of
waste, will be necessary.
In this regard plans detailing the methods of controlling erosion and sediment are required to be submitted
to the Council for approval prior to obtaining a Development Permit for Operational Works.
General
29. Any damage caused to any public utility during the course of construction shall be repaired to Council's
standards and at no cost to Council.
30. The transportation of all materials to and from the site shall be undertaken in a manner such that no
particle matter escapes onto a public road. All vehicles carrying materials either to or from the site shall
be covered to prevent materials including dust being windblown from the vehicle.
Environmental Health
31. The developer must provide a suitably external screened imperviously paved area large enough for all
refuse and recycling containers.
32. Refuse containers must be provided in accordance with the requirements of the Environmental Protection
(lnterim Waste) Regulations 1996 and (Waste Management) Regulation 2000, for the storage and
collection of refuse.
SEP p:\civica\documents\dd\01 O\from5000\01 0-2004-00005633-001\0006decnotice'doc
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.