Town Planning Assessment Report

Editor’s note— PSP6 Engineering
Design Standards - Roads, drainage
and earthworks provides guidance
on requirements for preparing an
Erosion Management Plan.

AO14.2
Construction works are designed and      AO14.2 - Complies
managed to restrict the extent           No vegetation clearing was
of clearing and soil exposure to the     necessary and soil exposure has
minimum necessary for access, and        been limited to a shed pad, batters,
safe construction at any one time.       and access.

AO14.3
For buildings:                           AO14.3 - Not Applicable
  a) upstream runoff is diverted         The proposal does not involve
      around the construction site;      buildings.
  b) sediment barriers are provided
      downslope of disturbed areas
      to prevent sediment washing
      into gutters, drains
      and waterways , wetlands or dr
      ainage lines either on or off
      the site; and
  c) temporary or permanent
      downpipes are connected to
      the stormwater system before
      laying the roof; or
  d) localised erosion is avoided by
      directing flow from downpipes
      over non-erosive areas.

AO14.4
Chemical flocculants used as part of     AO14.4 - Complies
an erosion and sediment control plan     Erosion and sediment control
do not harm the environmental values     measures will be undertaken in
within receiving waters.                 accordance with best practice
                                         standards so as to not cause
AO14.5                                   environmental harm.
Appropriately sized litter containment
areas, with provision for sorting        AO14.5 - Not Applicable
recyclables are provided for the type
of litter expected to be generated
onsite.




                                                                 Page 12 of 13