Attachment E - Secondary Dwelling (Exisitng Dwelling Plans from BA) · MCU22/0135

ATTACHMENT 2 – CERTIFICATES FOR PERMIT No. 8971


The following tables provide a list of the certificates that are likely to be required before a Final Inspection Certificate
(Form 21) can be issued for the building work. This list is subject to confirmation by Urban Certifiers after carrying
out a final inspection, and additional certificates may be required. Certificates must be from an approved competent
person or a QBCC licensee.
Certificates are required to be in the approved form (Form 15 or 16 as appropriate). In some cases it will be
necessary for these certificates to be supported by evidence of suitability.


                                                 STAGE CERTIFICATES
  No. Stage                             Notes
                                        This certificate can only be issued by a building certifier, but can be
   a)   Footing Stage                   based on a structural aspect certificate from a registered engineer and a
                                        setout aspect certificate from a cadastral surveyor is provided.
   b)   Frame Stage                     From Urban Certifiers or a competent person (e.g. a registered engineer)

   c)   Final Stage                     This certificate can only be issued by a building certifier.



                                                ASPECT CERTIFICATES
  No. Type                              Description
   a)   Roof trusses                    Form 15 from the manufacturer of the roof trusses confirming
                                        compliance with AS1684.2-2010 and/or AS1720.5-2015 and other
                                        relevant Australian Standards. A copy of the truss layout plan and
                                        tiedown report should also be provided.
   b)   Termite management              Form 16 from a QBCC licensed termite protection contractor, confirming
                                        the building has been provided with a termite management system in
                                        accordance with BCA Part 3.1.3 and AS3660.1-2014. A copy of the
                                        treatment plan/diagram should also be provided.
   c)   Roofing                         Form 16 from a QBCC licensed contractor, confirming the roof
                                        installation complies with NCC Part 3.5.1 and AS1562.1-1992.
   d)   Gutters                         Form 16 from a QBCC licensed contractor, confirming the gutter
                                        installation complies with NCC Part 3.5.2 and AS/NZS3500.3-2015 or
                                        section 5 of AS/NZS3500.5-2012.
   e)   Glazing – windows               Form 15 from the window manufacturer confirming the windows supplied
                                        for the project comply with AS2047-2014- and AS1288-2006.
   f)   Glazing – shower screen         Form 15 from the shower screen manufacturer confirming the glass
                                        supplied for the shower screens comply with AS1288-2006.
   g)   Smoke alarms                    Form 16 from the electrician confirming the smoke alarm comply with the
                                        Building Regulation 2006 and the NCC Part 3.7.2 (refer to conditions of
                                        approval for more detailed location requirements).
   h)   Bushfire construction           Form 16 from the builder and relevant contractors/suppliers (e.g. window
                                        glazing) confirming the materials and method of construction complies
                                        with the BAL requirements specified und AS3959-2009.
   i)   Wet area waterproofing          Form 16 from a QBCC licensed waterproofing contractor confirming the
                                        wet areas within the building have been waterproofed in accordance with
                                        AS3740-2010.
   j)   Insulation                      Form 16 from the builder or installer that insulation has been installed in
                                        accordance with the approved energy efficiency report.




49 DONNELLYS ROAD, RIDGEWOOD
PERMIT NO 8971                                                                                                  PAGE 5 OF 6