Original source · versioned page text
BUSHFIRE HAZARD ASSESSMENT AND MANAGEMENT PLAN v2 - Coveys Road TINBEERWAH (1)
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnBushfire Hazard Assessment and Management Plan v2 NCES REF: J000545 Lot 2, 4 & 5 on RP172460 & Lot 7 on RP895754 66, 82 & 98 Coveys Rd & 39 Tinbeerwah Rd, Tinbeerwah 5 SPP BUSHFIRE RISK ASSESSMENT 5.1 General A bushfire risk assessment for the site has been prepared generally in accordance with State Planning Policy – State Interest Guideline – Natural Hazards, Risk and Resilience (DILGP, 2016) and AS/NZS ISO 31000:2018 – Risk Management Methodology. The bushfire risk assessment details the likelihood that the proposed new buildings will be exposed to bushfire smoke, ember, radiant heat and/or flame attack considering the proximity to bushfire prone vegetation and likely bushfire behaviour. According to AS/NZS ISO 31000:2018, a ‘hazard’ is defined as a source of potential harm or a situation with a potential to cause loss, whereas a ‘risk’ is the chance of something happening that will have an impact on objectives measured in terms of consequences and likelihood. The State Planning Policy – State Interest Guideline – Natural Hazards, Risk and Resilience (DILGP, April 2016) refers to ‘acceptable risk’, ‘tolerable risk’, and ‘intolerable risk’ which are defined below. • Acceptable risk o A risk that, following an understanding of the likelihood and consequences, is sufficiently low to require no new treatments or actions to reduce risk further. Individuals and society can live with this risk without feeling the necessity to reduce the risks any further. • Tolerable risk o A risk that, following an understanding of the likelihood and consequences, is low enough to allow the exposure to continue, and at the same time high enough to require new treatments or actions to reduce risk. Society can live with this risk but believe that as much as is reasonably practical should be done to reduce the risks further. • Intolerable risk o A risk that, following an understanding of the likelihood and consequences, is so high that it requires actions to avoid or reduce the risk. Individuals and society will not accept this risk and measures are to be put in place to reduce risks to at least a tolerable level. 5.2 Risk Assessment The risk attributed to the hazardous vegetation within the assessment area and immediately beyond, in the absence of additional mitigation measures being implemented, is detailed in Table 2 for Lot 12, Table 3 for Lot 8 and Table 4 for Lot 9. Table 2 - Risk Assessment - Lot 12 Direction North/East South East West Approx. minimum distance to 40m >150m >150m 75m hazardous vegetation VHC’s 8.1 N/A N/A 8.1 Attack Mechanism Smoke* Not assessed Not assessed Not assessed Not assessed Ember Intolerable Acceptable Acceptable Intolerable Radiant Heat Intolerable Acceptable Acceptable Intolerable Flame Tolerable Acceptable Acceptable Acceptable © 2022 19
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.