2019-07-09 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                                          9 JULY 2019


2.    SITE DETAILS
2.1. Background
A Material Change of Use was approved in 2015 (MCU14/0102) over Lot 1 & 2 SP294726 for a
mixed use development as follows:
    Service station
    Convenience store
    Restaurant
    Retail, industrial and warehouse type uses
    Associated car parking and signage
The site was developed in 2016 and all tenancies have since been filled. At the time, the original
application was publicly notified, 14 properly made submissions were received (1 objection and 13
in support). The objection was primarily concerned with car parking, traffic generation, fuel storage
and the financial viability of existing food outlets.
Changes to this approval are detailed as follows:
MCU14/0102.01 - On 24 September 2015 Council approved a change to the approval which
primarily consisted of the inclusion of a vehicle drive through to the rear of the food outlet and minor
changes to floor areas and car parking.
MCU14/0102.02 - On 23 October 2015, Council approved a change to the approval to remove
Retail Business Type 6 – Hardware Store from the approval.
MCU14/0102.03 - On 14 March 2016, Council approved a change to the approval for minor built
form alterations to the entertainment and dining business use and to relocate one pylon sign from
Walter Hay Drive to Eumundi Noosa Road and change the approval to locate 3 illuminated signs
facing Eumundi Noosa Road.
MCU14/0102.04 - On 26 August 2016, Council approved a Material Change of Use to include a
showroom within the commercial complex.
MCU14/0102.05 – On 21 March 2017, Council approved a request to make a change to the existing
approval, to include Retail Type 6 Hardware for Shops 1 & 2.
MCU14/0102.06 – On 12 July 2017, Council approved a request to make a change to the existing
approval, to include additional floor area of 67m2 for a mezzanine level within the existing Trade
Tools tenancy.
The current approval (MCU14/0102 & OPW15/0051) allows for 2 illuminated pylon signs with a
maximum height of 5 metres on the Eumundi Noosa Road frontage and smaller one (not
illuminated) on the Lionel Donovan frontage. These signs are existing.
Refused changes to this approval and refused operational works (signage) are as follows:
MCU14/0102.07 & OPW17/0570 – On 21 December 2017, Council refused a request to make a
change to the existing material change of use approval over the site and proposed operational
works (signage), to erect a 5 metre illuminated freestanding pylon sign fronting Walter Hay Drive.




                                                                                        Page 7 of 128