Council archive · source document
Attachment 8- Amended Engineering Report MCU12/0208
Very large file (61.0 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
Original PDF page 61, section 1. The text section number identifies this passage in the reader.
Preliminary Erosion & Sediment Control Strategy
Noosa on Weyba
4 Available Management Practices
The IECA guidelines outline numerous best practice drainage control, erosion control and sediment control
measures that are available to assist with minimising sediment transportation from construction sites.
Table 4-1, Table 4-2, Table 4-3 and Table 4-4 list some of the commonly used control measures considered
appropriate for use during the construction phase of the proposed development.
Table 4-1 Drainage Control Measures
Technique Typical Use
Catch Drain To collect and divert sheet flows across a slope or around disturbed / exposed
areas.
Flow Diversion Bank / Bund To divert flows when in-situ soils are dispersive or highly erodible.
Batter Chutes To convey concentrated flows down steep slopes.
Level Spreaders To convert minor concentrated flows back to sheet flows.
Table 4-2 Velocity Control Measures
Technique Typical Use
Rock Check Dams Generally used in drains at least 500mm deep, with longitudinal grades of up to
10%. Recommended for locations where it is anticipated that rocks will be removed
once suitable grass cover has been established.
Sandbag Check Dam Recommended for drains less than 500mm deep, with longitudinal grades of up to
10%.
Chute and Channel Linings Recommended for steep channels where more appropriate to line channel rather
than trying to reduce flow velocity. Possible lining materials include grass or turf,
rock, erosion control matting or geo-synthetic lining. Allowable flow velocities will
dictate the type of lining material that is most appropriate.
Table 4-3 Erosion Control Measures
Technique Typical Use
Erosion Control Blankets For the temporary control of raindrop impact erosion on earth embankments not
exposed to concentrated flows.
Light Mulching For the control of raindrop impact erosion of exposed soils. Suitable for flat or
mildly sloping surfaces. Requires appropriate anchoring when placed on steeper
slopes. Can assist with seed germination on newly seeded soils. Types of light
mulching include hydromulch, temporary seeding and brush mulch.
Heavy Mulching For the stabilisation of exposed soils that are expected to remain non-vegetated for
medium to long periods. Can assist with weed suppression in non-vegetated areas.
Types of heavy mulching include bark or woodchip mulch, compost blanket and
rock mulch.
Revegetation For temporary or permanent stabilisation of exposed soils. Methods include turfing
and temporary seeding.
27 September 2013 Cardno 4
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Attachment 8- Amended Engineering Report MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 61.0 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.