Council archive · source document
Attachment 8- Amended Engineering Report MCU12/0208
Very large file (61.0 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
Original PDF page 63, section 1. The text section number identifies this passage in the reader.
Preliminary Erosion & Sediment Control Strategy
Noosa on Weyba
5 Preliminary Soil Loss Assessment
The bulk earthworks to be carried out on the site have the potential to increase the level of sediment laden
runoff discharging from the site for the duration of the construction phase. Based on this, the following
preliminary assessment of the development site has been undertaken to determine the on-site sediment
retention storage requirements that will be necessary to retain the expected soil loss generated from the
development areas. Refer to Cardno Sketch No. 510119/002-SK910 to 912 in Appendix B for the subject
site local catchment areas adopted for the preliminary soil loss assessment.
5.1 Preliminary Soil Loss Calculations
As identified within the initial geotechnical investigation, the sub-surface conditions generally encountered
across the site comprised of either loose, clayey sands or soft to firm silty / sandy clays underlain by stiff or
better clays. The identified clayey soil types are considered to be dispersive soils (Type D), and based on
the Revised Universal Soil Loss Equation (RUSLE) the predicted soil loss rates have been estimated for
each of the disturbed catchment areas located within the subject site.
Catchment parameters for the disturbed areas of the subject site were based on existing contour information.
The various soil loss parameters adopted, and the resultant soil loss volumes estimated, for each disturbed
catchment area using the revised soil loss equation are summarised in Table 5-1 below.
Table 5-1 RUSLE Soil Loss Estimate
Catchment Disturbed Rainfall Soil Slope Erosion Ground Soil Loss
ID Catchment Erosivity Erodibility Length/ Control Cover (C) (A) (t/ha/yr)
Area (ha) Factor (R) Factor (K) Gradient Practice
Factor (LS) Factor (P)
B1 2.23 5746 0.044 0.91 1.3 1.0 299
B2 3.62 5746 0.044 0.91 1.3 1.0 299
C 1.37 5746 0.044 0.91 1.3 1.0 299
D 3.75 5746 0.044 0.71 1.3 1.0 233
E 3.41 5746 0.044 0.71 1.3 1.0 233
F 3.44 5746 0.044 0.34 1.3 1.0 112
G1 2.13 5746 0.044 0.42 1.3 1.0 138
G2 1.96 5746 0.044 0.42 1.3 1.0 138
G3 2.18 5746 0.044 0.34 1.3 1.0 112
G4 2.31 5746 0.044 0.30 1.3 1.0 99
H1 2.09 5746 0.044 0.52 1.3 1.0 171
H2 2.79 5746 0.044 0.34 1.3 1.0 112
H3 1.41 5746 0.044 0.17 1.3 1.0 56
I1 3.94 5746 0.044 0.71 1.3 1.0 233
I2 3.83 5746 0.044 0.71 1.3 1.0 233
I3 2.78 5746 0.044 0.71 1.3 1.0 233
I4 3.90 5746 0.044 0.91 1.3 1.0 299
I5 1.93 5746 0.044 0.25 1.3 1.0 82
J 1.77 5746 0.044 0.34 1.3 1.0 112
K 0.66 5746 0.044 0.52 1.3 1.0 171
27 September 2013 Cardno 6
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Attachment 8- Amended Engineering Report MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 61.0 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.