2017-03-07 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                                  7 MARCH 2017


                                   Table – Waste Management Table
           MATERIALS ON-SITE                                  DESTINATION
                                                   Re-use and Recycling              Disposal
           Expected          Estimated    On-site             Off-site           *specify
           waste materials   volume(m³)   *specify proposed   *specify           contractor and
                                          re-use or on-site   contractor and     landfill site or
                                          recycling methods   recycling outlet   other disposal
                                                                                 site
           Excavation
           material
           Green waste
           Bricks
           Concrete
           Timber-please
           specify
           Plasterboard
           Metals - please
           specify
           Asbestos
           Other - please
           specify
          Note * If a demolition contractor is undertaking works, then the Waste Management
          table is to be completed by the demolition contractor.
          Waste Storage
    35.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy 9, Waste Management, including an external imperviously
          paved area correctly sized for all refuse and recycling containers and suitably
          screened from public places and neighbouring properties.
    36.   A bin wash area is required with a cold-water tap, hose and drain outlet connected to
          sewer, via a bucket trap. The drain outlet is to be designed to prevent storm water
          entry to the sewerage system which can be achieved by a bunded area, with a nib
          wall height of 100mm maximum, enclosing a wash area of 700mm x 700mm
          minimum (max 0.7m²). Alternatively the waste area can be roofed, or any other
          appropriate design approved by Council.
          Noise
    37.   Written certification is required from a suitably qualified person confirming that sound
          pressure levels from all mechanical plant and equipment comply with the following :
    38.   Air-conditioning and Refrigeration
              7am to 10pm: Maximum level allowable = background + 5dB(A)
              10pm to 7am: Maximum level allowable = background + 3dB(A)
    39.   Pumps
              7am to 7pm: Maximum level allowable = background + 5dB(A)
              7pm to 10pm: Maximum level allowable = background + 3dB(A)
              10pm to 7am: No audible noise.
          Assessment and certification is required immediately after installation of the
          equipment and prior to any occupation of the building. All equipment should be
          operating at the same time to test the overall noise level created, with the
          measurement location at either the residential boundary or outside the most exposed
          part of an affected building - whichever is the closest to the plant/equipment.


                                                                                    Page 9 of 91