Council archive · source document
Appendix D - Traffic Engineering Report · MCU23/0070
5 Site Access Arrangements
5.1 Vehicular Access
The development plan includes a single 5.5m wide vehicular driveway crossover to Douglas Lane in the
middle of the site frontage. This access will be priority controlled and limited to right-in/right-out
movements given the one-way nature of Douglas Lane.
Acceptable Solution A01.1/A02.1 of the Noosa Plan 2020 Driveways and Parking Code indicates that
vehicular accesses should be designed in accordance with AS2890 and NC Standard Drawings. For driveways,
the NC Standard Drawings defaults to the IPWEAQ Standard Drawings series, notably RS-051 – Heavy Duty
Vehicle Crossing.
Table 5.1 identifies the characteristics of the vehicular access arrangements with respect to AS2890
requirements. The last column identifies the compliance of each design aspect.
Table 5.1: Douglas Lane Vehicular Access Design Provisions
Design Aspect AS2890 Requirement Proposed Provision Compliance
3.0-5.5m wide / Category 1
(AS2890:2004)
Width / Crossover Type*^ 5.5m wide / Type A modified Performance Solution
6.0m wide / Type A
(RS-051)
Distance from intersection 6m (min) from tangent point 6m (min) from tangent point
Compliant
of kerb of kerb.
69m (desirable) ~35m looking west along
Sight distance*^ Performance Solution
45m (minimum) Douglas Lane (one-way)
2.0m wide x 2.5m deep 2.0m wide x 2.5m deep Compliant. Refer further
Driveway sight splays
(on exit side) (on exit side) details below
Minimum queuing provisions^ 1 vehicles / 6m ~1 vehicle / 4m Performance Solution
1:20 (5%) maximum within
Maximum driveway grade Not Assessed by TTM Refer further details below
first 6m
*Based on Douglas Lane being classed as a local road and default speed limit of 50km/h.
^Based on the access servicing 6 low turnover car parking spaces.
As seen in Table 5.1, a number of the design provisions for the vehicular access have been resolved as
performance solutions given the constrained nature of the site & one-way configuration of Douglas Lane.
Further details in relation to each of these elements is provided as follows.
Driveway Width / Crossover Type
The development plans make allowance for a 5.5m wide Type A modified driveway crossover. Whilst the
width does not meet the requirements for a Type A crossover under RS-051, it does meet the requirements
for a Category 1 driveway under AS2890.1:2004.
With regards to the ‘modified’ nature of the crossover, this relates to the flares. As there is no formal verge
along the Douglas Lane frontage, standard dimension flares cannot be provided.
Site: 36 - 38 Duke Street, Sunshine Beach 13
Reference: 23BRT0004 RP01
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix D - Traffic Engineering Report.pdfRelated documentApplication case desk ↗
About this file
- File size
- 4.5 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.