Council archive · source document
Town Planning Report · MCU13/0102
e 40% for First Floor to achieve a steeping of buildings. the ground floor. Front Setbacks Alllots shall have a minimum front setback of 3 metres, with garages setback a minimum of 4.5m, with minor intrusions permitted of eaves, covered entrances and the like. Where a lesser setback than 5.4m is proposed to garages: e Provision shall be given for visitor parking on the driveway with a minimum length of 5.4 metres, measured form the garage and a 3.0 metre separation from the back of kerb to the rear of a parked vehicle maintained. e The sightline requirements to the footpath shall be maintained in accordance with AS2890.1-2004, for vehicles parked on the proposed driveways. e Front and side setbacks are to be measured from the facade (face of building) to the boundary. Where the boundary alignment is non linear or irregular, for example corner blocks or cul de sac, the setback shall be calculated as an average distance along the length of the facade (face of the building) or garage alignment, which ever applies. Garages shall be setback in line with the main dwelling facade or behind the main dwelling facade. Compliant The proposed dwelling is in accordance with requirements and includes a minimum 5m setback measured from the boundary to the front building line and a 4.5m_ setback measured from the boundary to the garage. Further, the provision of a cross over measured approximately 5m from the boundary to the street frontage enables visitor parking on the driveway. We confirm that the proposed garage is setback behind with the main dwelling facade. Secondary Frontage (corner allotments) The minimum setback from the secondary street frontage shall be 3.0m. Windows, balconies, verandas and screening devices are to be incorporated into elevations facing street frontages to articulate building form. Laundries and clothes-drying facilities are not to be located along the primary or secondary street frontage, unless suitable screening is provided. Compliant The proposal is not for a corner allotment. Notwithstanding, the proposal includes perimeter fencing and landscaped treatments. Further, the proposal contains high quality building design and materials to articulate the building form, including the incorporation of screening devices such as aluminium louvers on the building facade, refer to Proposal Plans prepared by AV Jennings located at Appendix A. Rear Setbacks The minimum rear building setback shall be 2metres, with minor intrusions permitted for eaves and the like. Buildings shall be setback a minimum of 6m from the Conservation Parkland boundary, with minor intrusions permitted of eaves and the like. Swimming pools, pergolas, low decks and garden structures shall be setback a Minimum of 2m from the Conservation Compliant The proposal includes a 3m_ setback measured from the rear property boundary to the building line. The proposal is not sited adjacent to or abuts the Conservation Parkland boundary. Page 4 of 26
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Town Planning ReportRelated documentApplication case desk ↗
About this file
- File size
- 1.3 MB (small file)
- File type
No other editions are linked here.