Council archive · source document
Decision Notice - Change to an Existing Approval [As Published] · 132003.220735.7
2003/220735
128 The person acting on this permit shall apply and obtain for all other necessary permits including
crane permits, road opening permits, hoarding permits, footpath occupation permits and/or any
other approvals required under any other Act.
129 Prior to commencement of work relating to a Development Permit for Operational Works, the
Applicant shall sign a written undertaking to be responsible for the full cost of repairs to road
pavement, footpath, kerb and gutter, or other Council property damaged as a result of
construction of the proposed development.
If any person acting under this permit damages any Council property or facilities (such as
underground drainage, water supply and sewerage) , through any cause whatsoever in the
course of, directly or indirectly carrying out development, that person shall forthwith notify the
Manager - Land Development and shall forthwith rectify that damage at its cost and to the
satisfaction of the Manager - Land Development. Alternatively, the Applicant may request the
Council to carry out the rectification works.
Any damage to a water main shall be rectified by Council. Any damage to a sewer main shall be
undertaken by either Council or a Council approved contractor.
In all cases, Council reserves the right to carry out rectification works in an emergency and
where no reasonable attempt has been made to complete the rectification works as part of the
development.
All costs incurred by Council in any rectification works shall be repaid to Council prior to the
endorsement of the Plan of Survey.
Minimum Habitable Floor Levels
130 All buildings proposed on site (and areas utilised for carparking purposes associated with the
buildings) shall be constructed to comply with Council’s Minimum Floor Height requirements as
defined in Council’s Planning Scheme and on Council’s Scheme Maps at the time of issue of the
Building Permit.
In this regard and as an indication only – the site should have a Minimum Floor Height of RL 2.5
(AHD). These levels however are subject to change and verification shall be made to Council’s
Land Development Section prior to obtaining a Development Permit for Building Works.
Vehicle Access
131 Vehicle access shall be provided to and within the site generally as shown on drawing number
C5093/03/L4a Preliminary Street Network Plan dated 12/08/03 by Tate Professional Engineers.
Access arrangements will be amended if required when the amended Plan of Development is
accepted by Council.
132 The access to Lot 100 is to be located 30 metres from the holding line of the roundabout at Road
R1-R3 intersection.
133 A vehicular access driveway shall be designed and constructed from the street frontage of the
site for each lot in accordance with the following:
133.1 A minimum width of 3 metres and a maximum width of 4.5 metres outside the property and
6 metres inside the property.
133.2 Consideration given to nearby traffic calming devices and provide sufficient separation to
road intersections, in accordance with Austroads Part 5, Intersections at Grade.
133.3 Council’s design standards and to grades that prevent vehicles from scraping and/or
bottoming. Should any driveways be constructed to grades that do not comply with
AS2890.1-2004, Council will require that the driveway be removed and reconstructed to
levels that do comply.
Page 20 of 32
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Decision Notice - Change to an Existing Approval [As Published]Related documentApplication case desk ↗
About this file
- File size
- 130 KB (small file)
- File type
No other editions are linked here.