131001 Minor Change Request · 132006.268.03

     methods of controlling erosion and sediment are required to be submitted to the Council
     for approval prior to obtaining a Development Permit for Operational Works.

General

20. For the following classes of work associated with development, a Development Permit
     for Operational Works must be obtained prior to commencement of works relating to that
     class of work. The application may combine any or all of these classes of work:-

           Access and/or Carparking.
            Roadworks.

           Stormwater Drainage.
            Frontage Works.
            Erosion & Sediment Control
21. A suitably qualified Registered Professional Engineer shall prepare engineering
     drawings and specifications for all engineering works that will become Council
     infrastructure, which shall be submitted in conjunction with an application for a
     Development Permit for Operational Works. In this regard a DXF/DWG file on GDA94
     zone 56 grid of the proposed cadastre layout is to be submitted in conjunction with any
     application for Operational Works.

22. Digital detailed designs including drawings, calculations, specifications and a schedule
      of works, shall be submitted with any application for a Development Permit for
      Operational Works in respect of roadworks and stormwater drainage works. The design
      shall be in accordance with Council's Planning Scheme Policy PSP05 - Engineering
      Design Standards - Roads, Drainage and Earthworks. To avoid conflict with
      underground pipes or services, all existing and proposed services required by the
      development shall be shown on the plans.

23. To facilitate production of As Constructed drawings it is suggested that all design
     drawings are submitted in the Asset Design and As Constructed (ADAC) digital format.
      (Guidelines on the use of ADAC are available atwww.adac.com.au).

24. As Constructed drawings and data shall be certified by a qualified experienced Civil
     Engineer for design intent, and a Licensed Surveyor shall certify the cadastre and the
     location, level and type of all services and structures. All of which shall be submitted to
     Council for checking and for Council's records.

     The data must fully detail levels for all engineering works including but not limited to
     drainage structures, finished ground levels and pavement surface levels. The data shall
     be submitted in the Asset Design and As Constructed (ADAC) digital format. (Guidelines
     on the use of ADAC are available at www.adac.com.au).

     Approval of works shall not be granted until all As Constructed information has been
     supplied and accepted by Council.

Environmental Health

25. The developer must provide waste storage and disposal facilities in accordance with
     Planning Scheme Policy No 9 "Waste Management Multi-Dwellings and Commercial
     and Industrial Premises", including an external imperviously paved area correctly sized
     for all refuse and recycling containers and suitably screened from public places and
     neighbouring properties. A roofed waste/bin wash area is required with a cold-water
     tap, hose and drain outlet connected to sewer, or approved wastewater disposal system
     via a bucket trap and grease arrestor.