Skip to the record
For the highest quality transcripts.

Council archive · source document

23616DA - Change to Existing Approval [As Published] · 132003.221132.6

of 26

Text shows just the words. Original shows the document exactly as it was published.

                                                                                             23616DA


      The detailed deigns shall then be submitted to ENERGEX for approval and a copy of their
      approval submitted to Council in conjunction with a “Certificate of Electricity Supply for
      Proposed Subdivisions” (prepared by an approved ENERGEX Electrical Design Consultant)
      prior to Council endorsing the Plan of Survey.
      Any agreement with ENERGEX or an approved ENERGEX Electrical Design Consultant shall
      be wholly at the applicant’s expense and shall not entail a financial encumbrance on future
      purchasers of the proposed lots.
108. Street lighting and pathway lighting throughout the subdivision shall have a high energy efficient
     rating to the reasonable satisfaction of Council and shall generally be provided in accordance
     with the principles of Council’s Engineering Design Standards, section 11.3.3.
109. The requirements for TELECOMMUNICATION services shall be satisfied in relation to the
     provision of new telephone services to the proposed lots. In this regard written confirmation
     from an approved telecommunication agency shall be submitted to the Council prior to Council
     endorsing the Plan of Survey.
Engineering Works Designs
110. A suitably qualified Registered Professional Engineer, specialising in hydraulics shall prepare
     engineering drawings and specifications for stormwater designs and shall be submitted in
     conjunction with an application for a Development Permit for Operational Works.
111. All designs for engineering works involving the construction of pavements, kerb and channel,
     vehicular access, footpaths, turnouts, stormwater drainage, water supply or sewerage
     reticulation shall be prepared generally in accordance with the requirements of Council's
     Engineering Design Standards (except where affected by the Water Sensitive Urban Design
     Principles), shall reference where applicable to Council’s Standard Drawings and shall
     incorporate best engineering practice.
112. Prior to Council endorsing a Plan of Survey, a certificate from a registered Professional Civil
     Engineer shall be submitted to Council for each Development Permit for Operational Works
     issued pursuant to this permit. The engineer shall certify that he has supervised those works
     and that they have been completed in a workman like manner in accordance with good
     engineering practice and in accordance with that permit.
113. A suitably qualified Registered Professional Engineer shall prepare engineering drawings and
     specifications for all engineering works, which shall be submitted in conjunction with an
     application for a Development Permit for Operational Works. In this regard a DXF/DWG file on
     GDA94 zone 56 grid of the proposed cadastre layout is to be submitted in conjunction with any
     application for Operational Works. To facilitate production of As Constructed drawings it is
     suggested that all design drawings are submitted in the Asset Design and As Constructed
     (ADAC) digital format. (Guidelines on the use of ADAC are available at www.adac.com.au ).
114. As Constructed drawings and data shall be certified by a qualified experienced Civil Engineer
     for design intent, and a Licensed Surveyor shall certify the cadastre and the location, level and
     type of all services and structures. All of which shall be submitted to Council for checking and
     for Council’s records.
      The data must fully detail levels for all engineering works including but not limited to drainage
      structures, finished ground levels and pavement surface levels. The data shall be submitted in
      the Asset Design and As Constructed (ADAC) digital format. (Guidelines on the use of ADAC
      are available at www.adac.com.au).
      Approval of works shall not be granted until all As Constructed information has been supplied
      and accepted by Council.




                                                                                        Page 18 of 26

Used in these records

About this file

File size
122 KB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

23616DA - Change to Existing Approval [As Published].pdf · 122 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.