Original source · versioned page text
Att9 - Waste Management Plan
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn4 Bin Storage
4.1 Bin Locations
The location of the bulk bins for the Villages are ideally:
• Readily accessible to the source of waste/s generation
• Minimise amenity impact to users of the facility; and
• Complying with the requirements of the Service Provider’s vehicle specifications.
On this basis, the ideal location for the bulk bins is near the Villages and accessible by the internal sealed
road network. To minimise amenity impact for users – visual, odour, and noise impacts - screening and
appropriate separation from the Villages and bin areas should be implemented.
It is recommended that the bin areas have appropriate hardstands to assist with the collection of the bulk
bins by the Service Provider. An indicative location of the bin area for Village 2 is shown in Figure 2.
Figure 2 – Indicative bin area
Project number 20220146 File 20220146-59 Kabi RD WMP R0.docx, 2022-09-06 Revision 1 7
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.