15010_Noosa Council_Decision Notice_221215 · OPW18/0022

                                                                                                        OPW15/0172


                              Works within Road Reserve/Reinstatement
                      15.     Safe pedestrian access on all streets in the vicinity of the development must be
                              maintained at all times. Should footpath/road closures be necessary to carry out
                              construction works, Council’s Engineering Officer must be notified prior to the
                              proposed closure and all requirements complied with.
                      16.     All frontage works must match neatly with existing road and verge/footpath
                              features. Additional works beyond the frontage may be required to provide an
                              acceptable transition to existing road and verge/footpath profiles.
                      17.     Electrical conduits or other services proposed to be installed within existing and
                              proposed road reserves under existing sealed carriageways, concrete pathways,
                              concrete/sealed driveways or significant vegetation must be installed by boring.
                              Trenching is not permitted, unless specifically approved by Council.
                              Pathways
                      18.     All pathways must be constructed in accordance with the following requirements:
                              a.       All footpath/cycleway must comply with Council’s Standard Drawing SEQ R-
                                       065.
                              b.       Provision must be made for disabled access at all kerb crossings associated
                                       with pathways, in accordance with Council's current standards.
                              c.       All paths must have a slip resistant surface
                              d.       Expansion and contraction joints must provide a flush finish. Installation of
                                       joints by saw cutting is preferred to ensure a smooth ride for cyclists
                              e.       The required work includes any modifications to ensure the footpath finishes
                                       flush with all existing service covers and the like, or alternatively these
                                       services are raised or altered, so as not to create a pedestrian safety hazard
                              f.       The existing sealed footpath must be resealed to match the existing width,
                                       using an approved asphaltic concrete with a minimum depth of 10mm.
                                       Where construction work is not undertaken by council, separate written
                                       approval from Council’s Engineering and Environment Assessment Branch
                                       will be required prior to the commencement of the resealing work.
                      19.     All elements of the existing path in the frontage of the site must be removed and
                              replaced with the new path.
                      20.     Pathways must:
                              a.       terminate in a manner that ensures smooth transition to existing surfaces for
                                       public safety
                              b.       be designed and constructed to comply with the Disability Discrimination Act
                                       (DDA), Access to Premises Standard, Austroads and relevant sections of
                                       AS1428 Design for access and mobility
                              Site Access and Driveways
                      21.     Driveway crossovers must be constructed in accordance with council’s Standard
                              Drawing SEQ R-051




                                                                                                              Page 5 of 14


Document Set ID: 20003332
Version: 1, Version Date: 22/12/2015                                                                Print Date: 22 December 2015, 3:18 PM