Council archive · source document
22441 DA - Response to Information Request [As Published] · 132001.210331.2
* Job No. CE07/044 6.0 15 600 6.5 15 600 7.0 15 600 75 20 800 8.0 23 920 *Equiv ‘N’ = DCP btows/300 mm + 1.3 as a minimum vatue for this site On the basis of the above, a screw pile with a spiral diameter of 300 mm would carry a working load of 6.0 — 6.5 tonnes at a depth of 7.5 to 8.0 metres. 4.3 Garage Structure Excavation into the slope may be made using CFA (continuous flight auger) piles propped by the garage roof and sand anchors as necessary. a) Active Pressures Pressures on the high wall al the back of the garage may be calculated from i) ii) Very loose sand 0-3m Sand Density (y) Angle of Friction (4) Bip Active Pressure Coefficient Ka Uniform Pressure on Wall P,_ Medium Dense Sand > 3m Sandy Density Angle of Friction ($) Bid Active Pressure Coefficient Ka Uniform Pressure on Wall Pa 17 kNim? = 32 degrees = 1 (B= slope in degrees) = 0.85 = 0.65 yH Ky = 94H = 17.5 kNim? = 38 degrees = 0.84 = 0.5 = 0.65 yH Ke = 5.7H Active pressures on the garage wall are summarized on Figure 1. For a rigid and unyielding wall, increase the above pressures by a multiplier of 1.5. b) Passive Resistance Wall forces can be resisted by sand anchors or the garage wall acting as a prop, or a combination of both. Passive resistance from the sand on the Park Road side of the garage provides the restraint as, PR = 37D Kp PR = 1.5 yD* Ky B MR = 0.5 yD° K, B 00979 Kidds & Co Designers Pressure Force Moment MORRISON GEOTECHNIC
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
22441 DA - Response to Information Request [As Published]Related documentApplication case desk ↗
About this file
- File size
- 4.3 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.