Minor Change Existing Approval MCU22 0038 02 · MCU22/0038.02

                      Public Safety
               20.    All ground floor shopfront glazing must be protected against vandalism by the use of a form
                      of safety glass such as toughened or laminated glass.
               21.    During operating hours, all parking areas, pedestrian areas and entrances/exits to all
                      stairwells, lifts, foyers and public toilets must be well lit with vandal resistant lighting and with
                      intensities to satisfy the requirements of Australian Standard AS1158 “Public Lighting Code”.
                      Lighting must be designed to reduce the contrast between shadows and well lit areas. In
                      particular, appropriate security lighting must be provided in the location of the bicycle/ scooter
                      parking and bin storage area.
               22.    After hours access to loading docks, storage areas and the basement carpark (including the
                      vehicle ramp and all stairwells) must be restricted by a security gate, lockable doors and/or
                      other suitably appropriate means. The basement carpark must be kept closed and locked at
                      all times while the use is not operating.
                      Community Management Statement
               23.    Any proposed Community Management Statement required for the development pursuant to
                      the Body Corporate and Community Management Act 1997 must be submitted to Council for
                      endorsement at the same time as submission of the Building Format Plan (or similar) to
                      Council for compliance assessment.
               24.    All clauses and by-laws of the proposed Community Management Statement must accord
                      with the requirements of this Decision Notice.
                      Landscaping
               25.    The site must be landscaped generally in accordance with an Operational Works permit.
               26.    Any landscaping in the road reserve must be in accordance with an Operational Works
                      approval.
               27.    The development site must be landscaped. The works must be undertaken in accordance
                      with an Operational Works approval and the Noosa Plan for that specific area and Planning
                      Scheme Policy (PSP2) - Landscaping and must include in particular:
                      a.      the works shown on the Approved Plans;
                      b.      the feature trees (Angophora costata) must have a minimum pot size of 100 litres;
                      c.      protection of vegetation within the 10-metre wide Environmental and Conservation
                              Zone;
                      d.      vegetation installed for landscaping adjacent to the 10-metre-wide vegetation strip
                              protected by the Environmental and Conservation Zone must only include Noosa native
                              species and not include any of the undesirable species as detailed within the Noosa
                              Plan 2020 - Scheme Policy 3 Landscaping;
                      e.      vegetated screening of any electrical transformers, bin storage areas and the like from
                              the road frontage;
                      f.      control of all weed species listed in the following standards and legislation:
                              i.       declared plants under the Land Protection (Biodiversity Act 2014 and sub-
                                       ordinate Regulation 2016).
                              ii.      Noosa Local Government Area Pest Management Plan 2015-2019.
               28.    All entry statements, fences, batters, retaining walls and buffer/screen plantings must be
                      located entirely within private land and not within the public road reserve.
               29.    All landscape works must be established and maintained in accordance with the approved
                      design for the life of the development, and in a manner that ensures healthy, sustained and
                      vigorous plant growth. All plant material must be allowed to grow to full form and be
                      refurbished when its life expectancy is reached.



                                                                                                            Page 4 of 15
Document Set ID: 23565068
Version: 5, Version Date: 21/02/2025