Original source · versioned page text
2020-07-16 SM Agenda - Item 1 - Attachment 5 - Final Noosa Plan 2020 Part 8-10 Schedules & Appendix
The original of this document is very large (19.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance Outcomes Acceptable Outcomes
adjoining lands and in the water are avoided; and (iii) have no jetty head;
(h) they reflect the character and setting of the work’s (iv) allow for safe access and manoeuvrability of vessels
immediate surrounds of the locality. for both the neighbouring property and the subject
property; and
(v) are not constructed on sites where there is an
existing shared jetty on either prolongation of the
side property boundaries.
AO16.3
For lots that adjoin those described in AO16.2, the jetty is located
well away from the common boundary.
PO17
Landings are not roofed. No acceptable outcome provided
Design, Construction and Safety Jetties Table 9.4.9.3 Criteria for assessment (part)
Performance Outcomes Acceptable Outcomes
Design, Construction and Safety for Jetties within Noosa Waters Estate waterways
PO18
Structures such as handrails, light bollards, piers and pumping No acceptable outcome provided.
equipment for semisubmersible floating docks have a maximum
height of 1100mm above the jetty floor.
PO19 AO19.1
Development is designed and constructed for the sole purpose of Jetties—
providing access to vessels and are sited and designed to avoid (a) are a maximum width of 1.5 metres;
—
(b) a maximum length of a jetty head is not more than 7 metres
(a) cluttering of waterways; (Refer Figure 9.4.9.3C);
(b) excessive traffic volumes within foreshore areas, on (c) constructed predominantly of timber;
adjoining lands and within the waterway; and
(d) are not constructed parallel to the revetment wall; and
(c) unacceptable risks to personal and public safety. extend a maximum of 10 metres past the quayline.
AO19.2
For “Y” and “T” shaped jetty heads or other shaped jetty heads—
(a) a maximum area of 10.5m² excluding any walkway is
provided; and
(b) a walkway with a minimum length of 3 metres is provided to
the jetty head (Refer Figure 9.4.9.3D).
AO19.3
Jetties have independent support structures and are not
supported by the revetment wall.
AO19.4
Seep holes in the revetment wall are not obstructed by any jetty.
AO19.5
For lots comprising a dwelling house or dual occupancy, a
maximum of one jetty per development is constructed.
AO19.6
Multiple dwellings with common property along the waterway
frontage meet the following—
NOOSA PLAN 2020 Page 125 of 150
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalVery large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.