Ltr - 20250128 - Further Advice Response - 100 Hilton Terrace, Noosaville - Final · MCU24/0112

It is acknowledged that in the revised plans provided as part of the response to the Information
Request, eaves have been added to the façade of the building fronting Hilton Terrace (approximately
30% of the perimeter of the building). The overall extent of the eaves provided to the perimeter of the
building is significantly less than the 75% required by AO19.1 of the Medium Density Residential Zone
Code.
The current extent of eaves provided to the perimeter of the building does not successfully avoid a box
profile as required by PO19 of the Medium Density Residential Zone Code.
Advice Required
Provide to a greater extent of the perimeter of the building (closer to 75%), eaves which are at least
600mm.

Response:
In response to Issue 2, the Applicant has undertaken a design review to identify opportunities for the
increased provision of eaves to the perimeter of the building. The revised design achieves eaves
which are at least 600mm to 75% of the building.
To demonstrate this outcome, Blight Rayner has prepared an Eaves drawing which is detailed in
Figure 2 below.
Figure 2 – Proposed Eaves Cover




Source: Blight Rayner



Ltr - 20250901 - Further Advice Response - 100 Hilton Terrace, Noosaville                                3