SUPERSEDED Decision Notice - 010.2007.00001022.001 [As Published] · 132007.1022

NOOSA COUNCIL IDAS Development Application Decision Notice                                                     6 of 12

32.   All carparking shall be kept and maintained in a condition fit for use.
Frontage Works
33.   Footpath improvements such as topsoiling, grassing, and tree planting are required to the Gympie
      Terrace frontage of the site in accordance with Planning Scheme Policy PSP03 Landscaping Plants &
      Guidelines. Grass shall be couch, free of weeds.

34.   The existing footpath shall be maintained or repaired to meet Council’s design standards and to an
      alignment that protects any significant vegetation or any underground services.

35.   All paths, driveways and parking areas shall be designed and constructed to ensure pedestrian safety
      using non-slip materials, to produce an evenly graded surface finish, and to be in accordance with the
      Disability Discrimination Act 1992 and Australian Standard 1428.1 Design for Access & Mobility.

36.   Where applicable, all redundant vehicular crossings to the site shall be removed and replaced by kerb &
      channel, footpath paving and landscaping such as trees and grasses in accordance with Council’s
      Standard specifications prior to commencement of the use permitted by this permit.
Roof Water & Stormwater Drainage
37.   Roof runoff from any new dwelling shall be directed to a rainwater storage system or tank (minimum
      storage 5000 litres per dwelling unit) that is installed to ensure water from the tank is used for external
      uses (such as watering gardens, irrigation, ornamental ponds, water features, topping-up swimming pools,
      outdoor cleaning, etc) and for use in flushing of toilets internal to the dwelling units. All rainwater tanks are
      to be designed and installed in accordance with the Queensland Development Code (QDC), Part 25 –
      Rainwater Tanks, and shall be part of the plumbing application in conjunction with the building approval.
      The location and capacity of the tanks shall be clearly shown on the plans submitted for Building Works
      and Operational Works approval and any overflow shall be directed to the road frontage located at
      Gympie Terrace.

38.   All stormwater drainage (including roof water overflow from the rainwater storage system) shall be
      collected and discharged so there is no net increase in stormwater runoff from the site. Stormwater
      drainage permitted to drain from the site shall be discharged to Council’s existing drainage structures in
      Gympie Terrace. The maximum discharge of stormwater drainage allowable to Council’s kerb & channel
      street drainage system at any one location is 25 litres/second.

39.   All site stormwater drainage shall be by means of a gravity system.
Sewer Mains
40.   The site shall be connected to Council’s existing sewerage reticulation systems and be constructed in
      accordance with Council’s standards and requirements at no cost to Council.

41.   The existing sewer main is located in the adjoining property at the rear of the site and the ‘zone of
      influence’ (taken as the area within a 45-degree angle measured from the invert of the sewer main to the
      finished surface level) shall be accurately located and determined by a licensed Surveyor and shown on
      all plans submitted for Operational Works approval.
Town Water Supply
42.   The site shall be connected to Council’s existing town water supply and be constructed in accordance with
      Council’s standards and requirements at no cost to Council.

43.   Each individual water connection to the water reticulation system shall extend to the property boundary
      and be metered. All fees for the supply of water meters shall be paid to the Council.

44.   All water meters must be located outside the property boundary and in an easily assessable location to
      facilitate unhindered reading by Council and/or Council’s contracted water meter readers, and not behind
      fences or locked gates.




AOP2 c:\docume~1\aop2\locals~1\temp\bcl technologies\easypdf 5\@bcl@10061a81\@[email protected]