Original source · versioned page text
12. Existing EA (2016)
Permit Environmental authority EPPR00439413 Table 5: Contaminant Release Limits to Water Discharge Discharge aes : : 7 Minimum location 1 location 2 Quality utes ste BEN monitoring | monitoring | characteristics Release limit Limit ype lead point point 4q y Si $2 pH 7-8.5 range pre rel Dissolved se Daily when Si S2 Oxygen 6 mg/L minimum dredging Must not exceed 2 NTU above a background* value where the background value is less than 20NTU . Si $2 Turbidity or 10 percent greater than a aan background value where the ging background value is greater than 20NTU Oil. Grease Daily visual Si $2 Scum and Litter Not visible or otherwise noticeable CE Ta 20th percentile — 6mg/L Daily Suspended ‘ representative Si S2 Solids 50th percentile - 10mg/L sample when 80th percentile - 16mg/L dredging *For the purposes of this condition a “background value” for a quality characteristic is the value of the quality characteristic measured at a background sampling and in situ monitoring point in the receiving waters not affected by the release situated between fifty (50) and one hundred (100) metres up- current from the release point and the background must be measured one (1) hour either side of the local high water and local low water. S1- within 3m offshore from the location of beach nourishment. S2-— a down-current sampling point in the receiving waters situated not more than one hundred (100) metres from the dredge in the down-current direction at times when tidal flows or other flows are occurring and not more than fifty (50) metres distance from the dredge during slack water conditions. Page 11 of 24 * GK130701 * EM797 * Version 1 Department of Environment and Heritage Protection
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.