Original source · versioned page text
INTEGRATED WATER QUALITY MONITORING PROGRAM - BURGESS CREEK · Unitywater Burgess Creek REMP 2022 Annual Review (A7703347)
Burgess Creek Monitoring Program
Annual Review 2022
access to the site. At monitoring site B8, samples were collected and analysed from 3 of 12
sampling events. B8 is located within an ephemeral section of the Creek and only contains
surface water when it rains or immediately following rain. This prevented the collection of water
quality samples and was the reason for the absence of water quality parameter
concentrations.
5.1 Climatic Conditions
Long-term rainfall and temperature data were collected from the SILO Climate Data 1 within
the monitoring area for the Burgess Creek Water Quality Monitoring Program at the
following coordinate location:
• Latitude: -26.40 degrees south.
• Longitude: 153.10 degrees east.
SILO represents a gridded dataset based on records provided by the Bureau of
Meteorology (BoM). The data is then processed to fill gaps in data and produce a spatially
complete dataset (Queensland Government, 2021). A summary of monthly averages of the
SILO long-term data is in Figure 5 and Figure 6. The following general trends were
observed in the SILO data:
• Higher monthly rainfall averages during January, March, April, November, and
December, the "Wet Season".
• Lower mean monthly rainfall between May through to October, the "Dry Season".
• In 2021, the total rainfall record from SILO was 1613.40mm, compared to
2014.90mm of rainfall in 2020.
• Rainfall received in 2021 was below the long-term average annual rainfall of
1771.82mm recorded since 2010.
This document may not, in whole or part, be copied, photocopied, reproduced,
or translated without prior consent from the CEO, Unitywater. Page 11 of 64
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take up to a minute.