2019-06-05 Special Meeting Minutes

SPECIAL MEETING MINUTES                                                                 5 JUNE 2019


          The purpose of the Waste Management Plan is to facilitate the segregation of waste
          for the effective reuse and recycling of such materials. Segregated wastes attract
          significantly reduced disposal fees at the landfill with some items free. Higher gate
          fees are charged for mixed waste.
          Waste Management Plans (construction and demolition) are required to be submitted
          in accordance with Planning Scheme Policy 11, Waste Management Plans.
          Waste storage areas are to provide for adequate separation of all reusable, recyclable
          and waste materials. These shall be located so that they are convenient and safe to
          use.
          The Plan shall contain the following information:
          a.    The site area for the storage and separation of waste is to be shown on the plan
                drawings accompanying the application
          b.    A waste management table as indicated below is to be completed showing how
                waste material is to be segregated - recycled – reused or disposed.
          c.    Table – Waste Management Table
          MATERIALS ON-SITE                                   DESTINATION
                                                  Re-use and Recycling                  Disposal
          Expected        Estimated      On-site            Off-site                *specify
          waste           volume(m³)     *specify proposed *specify contractor      contractor and
          materials                      re-use or on-site  and recycling outlet    landfill site or
                                         recycling methods                          other disposal site
          Excavation
          material
          Green waste
          Bricks
          Concrete
          Timber-please
          specify
          Plasterboard
          Metals -
          please specify
          Asbestos
          Other - please
          specify
          Note * If a demolition contractor is undertaking works, then the Waste Management table is to
          be completed by the demolition contractor.
          Waste Storage
    51.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy 9, Waste Management, including an external imperviously
          paved area correctly sized for all refuse and recycling containers and suitably screened
          from public places and neighbouring properties.
    52.   A bin wash area is required with a cold-water tap, hose and drain outlet connected to
          sewer, via a bucket trap. The drain outlet is to be designed to prevent storm water entry
          to the sewerage system which can be achieved by a bunded area, with a nib wall height
          of 100mm maximum, enclosing a wash area of 700mm x 700mm minimum (max
          0.7m²). Alternatively, the waste area can be roofed, or any other appropriate design
          approved by Council.
          Noise
    53.   Upgraded building envelope constructions and the provision of mechanical
          ventilation/air conditioning which achieves the ventilation requirements of the Building
          Code of Australia, in accordance with the Second Joint Report of Experts in Noise (30
          May 2018) for Planning and Environment Court Appeal 4066 of 2017, including:

                                                                                       Page 13 of 16