Skip to the record
Search everything, all in one place.

Council archive · source document

160105 NSC Change to MCU Approval 111016 · MCU13/0251

Attached to the e-mail Request for change to approval MCU13/0251.03.

of 16

Text shows just the words. Original shows the document exactly as it was published.

                                                                                                   MCU13/0251.01

               18.    Certification must be submitted from a suitably qualified person which certifies that the
                      recommendations of a Noise Management Plan approved by Council have been
                      incorporated into the development.
                      Waste Management Plan
               19.    A Waste Management Plan (Operational) in accordance with Planning Scheme Policy
                      No. 9 “Waste Management Multi-Dwellings and Commercial and Industrial Premises”,
                      for the day-to-day operation of the development is to be submitted and approved by
                      council prior to the issue of a Development Permit for Operational Works. The Plan
                      should include the following information as a minimum:
                      •       The types of waste that will be generated from the activities approved within the
                              development.
                      •       Estimated volumes or tonnage of both recyclables and waste generated.
                      •       Methods to be used for dealing with any green waste.
                      •       Initiatives to minimize waste either by waste prevention, reduction, re-use or
                              recycling.
                      •       Description of procedures for getting all waste to the bins; the storage of bins and
                              the collection of bins by the contractor.
                      •       A description of the design details of waste storage and recycling areas including
                              size, location, elevation, enclosure/s, floor plan and methods of bin washing that
                              prevent contamination of storm water and an appropriately sized bin wash area
                              drained to sewer.
                      •       A description of types and volume of waste storage containers to be used.
                      •       The waste and recycling storage area should include the provision of correctly
                              sized containers for all waste and recycling materials including putrescible matter,
                              non-recycling waste, paper/ cardboard, glass, aluminium/steel cans, waste oil,
                              styrofoam boxes, etc., and bin washing facilities connected to sewer.
                      •       A detailed description of the waste vehicle access to collect waste including
                              vehicle turnarounds consistent with vehicle access requirements that allow
                              vehicles to enter and leave the site in a forward direction. It should be noted that:
                              o Waste vehicles are front loading for steel bins 1.5 to 3m3 bins
                              o Waste vehicles are rear loading for plastic low noise bins 1.1m3 bins
                              o Waste vehicles are side loading for 240 litre wheelie bins
                              o The advisory notes contain specifications for Refuse Vehicle Access
                                Requirements for design purposes
                      Outdoor Lighting
               20.    Any outdoor lighting with the potential to affect surrounding residential premises shall be
                      designed, installed, operated and maintained in accordance with AS4282 "The Control
                      of the Obtrusive effects of Outdoor Lighting".
               21.    During operating hours, all parking areas, pedestrian areas and entrances/exits to all
                      stairwells, lifts and public toilets must be well lit with vandal resistant lighting and with
                      intensities to satisfy the requirements of Australian Standard AS1158 “Public Lighting
                      Code”. Lighting must be designed to reduce the contrast between shadows and well lit
                      areas.




                                                                                                    Page 4 of 16


Document Set ID: 20182356
Version: 1, Version Date: 11/10/2016

Used in these records

About this file

File size
148 KB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

160105 NSC Change to MCU Approval 111016.pdf · 148 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.