Original source · versioned page text
2020-07-16 SM Agenda - Item 1 - Attachment 3 - Final Noosa Plan 2020 Part 4-6
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance Outcomes Acceptable Outcomes
Basements: Basements:
(a) visually integrate with the building; (a) are limited to one access a maximum of 6 metres wide;
(b) do not dominate the street or building design; and
(c) are screened through landscaping; and (b) do not encroach into building setback areas.
(d) do not present as a storey to the street.
Editor's note— refer to Figure 6.9.2
Front fences and walls
PO17 AO17.1
Front fences and walls are designed and sited to: Front fences or walls are set back an average of 1 metre and are
(a) contribute to the attractiveness of the streetscape; articulated to provide visual interest by stepping the design at a
maximum of 5 metre intervals.
(b) be compatible with the existing streetscape character;
(c) avoid interference with movement of surface stormwater; AO17.2
(d) allow for casual surveillance of the street; Where located on the boundary:
(e) provide planting in front of solid fences and walls; and (a) the solid portion of front fences and walls is no more than
1.2 metres high; or
(f) ensure plantings between the front fence and the footpath
does not create an impediment for pedestrians using the (b) the walls contain openings or materials that ensure it is
footpath 50% transparent and has a height not exceeding 1.8
metres.
AO17.3
Solid front fences and walls may be 1.8 metres in height if the
property has frontage to an arterial road or a distributor road.
AO17.4
The area of land between the front fence and the boundary is
landscaped to screen the fence from the street however
landscaping does not encroach more than 500 millimeters into
the road reserve or within 1.5 metres of a sealed footpath.
Editor's note— for examples refer to figure AP34A and
figure AP34B
Materials and finishes
PO18 AO18
Development incorporates: Buildings and structures use:
(a) materials and finishes that complement the surrounding (a) natural finishes wherever possible;
area and integrate with the surrounding natural and built (b) a mix of lightweight and textured external finishes;
environment; and
(c) masonry construction where variation is provided in texture
(b) a variety of external finishes to provide an interesting built and the façade uses a variety of finishes to break up the
form and avoid bulky single plane finishes surface; and
(d) open or transparent balustrades.
Editor's note—refer to Figure AP33B
Roof forms
PO19 AO19.1
Roof forms: With the exception of Noosa Heads and Coastal Communities
(a) contribute positively to the local skyline; Local Areas, the main roof of the building has a roof pitch no less
than 5 degrees and has minimum 600 millimetre eaves to at least
(b) complement the character of the locality and the topography
75% of the perimeter of the building.
of the site;
(c) avoid box profiles/parapets; and AO19.2
(d) do not create opportunities for overlooking the private open Development does not include rooftop terraces.
space or internal spaces of neighbouring properties.
AO19.3
NOOSA PLAN 2020 Page 18 of 48
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.