EngSWMP

    4. Cut the T sections to length, and pop rivet an L-bracket to one end of the T sections.




    5. Insert the T section, with L-bracket under the lintel and secure L-bracket to the pit wall with an 8mm
       Galvanised Dyna Bolt.




    6. Secure second L-bracket to the opposite pit wall using a Dyna Bolt.

    7. Pop rivet the free side of the T section to the second L-bracket.

    8. Repeat the steps 5-7 for the second T section.




©2013 Stormwater360 | EnviroPod Installation Manual                                                             5