Skip to the record
Search everything, all in one place.

Council archive · source document

Approved Document Construction & Tree Management Plan OPW25-0206 · OPW25/0206

of 40

Check the original when the exact wording matters.

Plans and drawings: the text below has words only, no drawings.

Very large file (10.8 MB): may take a few minutes to open.

Log in to see the plans as drawn
              which they are growing. A lightweight Post and Rail structural prefabricated steel framework allows for the
              location of the foundations to move in two directions along the frame, allowing for flexibility on site and the
              ability to adapt to any tree root systems. This method is used extensively in modular construction. The
              structural engineer will work closely with the architect and the arborist to establish the foundation system
              most suitable at each location.
             Refer to ATTACHMENT C for detailed information on footing excavation methodologies.
             Concrete works to footings will be carried out with a strong focus on environmental sustainability and
              minimizing impact on the site's sensitive ecosystems. Environmental Sustainability can be achieved by
              several methods including:
              o A reduced water-cement ratio subject to structural engineering requirements.
              o Supplementary Cementitious Materials (SCMs) could be incorporated to reduce the amount of
                    cement required and improve concrete properties; and
              o Recycled concrete aggregates can be used to reduce the demand for natural aggregates and
                    minimize waste.
             Concrete will be pumped to the cabin footings from the main site laydown areas. This will minimize the
              number of concrete trucks, reducing noise and emissions. Low impact curing methods, such as water
              curing or membrane curing, can be used to conserve water and reduce environmental impact.
             To protect fauna and flora, strict measures are to be implemented by the main contractor to prevent
              concrete spills and leaks.
             Regular cleaning of equipment and work areas will be required to minimize the risk of concrete
              contamination.
             Buffer zones are to be established by the Project Arborist and Contractor around sensitive vegetation to
              protect it from concrete splashes and spills.
             Erosion and sediment control measures will be required to prevent concrete-laden runoff from entering
              water bodies.

      Structural Framework:
           The intention is to use lightweight prefabricated structural steel framing that will be assembled on site – a
              Post and Rail structural prefabricated framework.
           Steel framing can be designed and manufactured in set lengths, allowing for easier site delivery and
              flexibility for installation in restricted spaces.
           Temporary scaffolding and small construction equipment may be required for this initial steel erection.
              This can be carefully planned and monitored as required per cabin build.
           The final structural methodology will be worked up by a qualified structural engineer during the detail
              design stage. Continual collaboration with the architects and arborist will ensure a fit-for-purpose outcome
              that responds to all site constraints and requirements.

      Cladding and Roofing:
           To minimize the environmental impact during roofing and cladding works, a modular construction
             approach, where feasible, will be employed. Prefabricated panels can be manufactured off-site and
             transported to the site using smaller, less disruptive vehicles.
           Bushfire requirements will be required to be factored into the final roofing and cladding construction
             methodologies in accordance with the approved Bushfire Management and Mitigation Plan and to be
             considered under the Development Permit for Building Works.
           Manual handling will be prioritized to reduce site disruption, noise pollution and vibration.

Construction and Tree Management Plan - REV03                                                                Page 54 of 45

Used in these records

About this file

File size
10.8 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Approved Document Construction & Tree Management Plan OPW25-0206.pdf · 10.8 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.