Appendix F. Civil Engineering Report Part 2

State Planning Policy (April 2016)
Appendix 3, SPP Code: Water Quality

                           AO3.2
                                                                                      A03.2 – N/A
                           Non-tidal artificial waterways are located:
                           a.    outside natural wetlands and any associated
                                 buffer areas, and
                           b.    to minimise disturbing soils or sediments, and
                           c.    to avoid altering the natural hydrologic regime in
                                 acid sulfate soil and nutrient hazardous areas.


PO4                        AO4.1

Any non-tidal artificial   Where a non-tidal artificial waterway is located
                                                                                      Not applicable. No non-
waterway is located in     adjacent to, or is connected to, a tidal waterway by
                                                                                      tidal artificial waterways
a way that is              means of a weir, lock, pumping system or similar:
                                                                                      proposed for future
compatible with
                                                                                      development.
existing tidal              a.   there is sufficient flushing or a tidal range of
waterways.                       >0.3 m, or
                            b.   any tidal flow alteration does not adversely
                                 impact on the tidal waterway, or
                            c.    there is no introduction of salt water into
                                 freshwater environments.




Design to avoid/minimise new impacts

PO5                        AO5.1
Any non-tidal artificial   Any non-tidal artificial waterway is designed and          Not applicable. No non-
waterway is not            managed for any of the following end-use purposes:         tidal artificial waterways
designed only for                                                                     proposed for future
                           a.    amenity including aesthetics, landscaping and
stormwater flow                                                                       development.
                                 recreation, or
management or
stormwater quality         b.    flood management, or
management.
                           c.    stormwater harvesting as part of an integrated
                                 water cycle management plan, or
                           d.    aquatic habitat, and
                           AO5.2                                                      A05.2 – N/A
                           The end-use purpose of any non-tidal artificial
                           waterway is designed and operated in a way that
                           protects water environmental values.




Project Address – Project Description
ADG Engineers Aust. Pty Ltd
Page 2