Engineering Code Assessment Report

                                           Editor’s Note— DESIGN AND TECHNICAL
                                           REQUIREMENTS FOR INFRASTRUCTURE FROM
                                           THIRD PARTY PROVIDERS ARE TO BE IN ADDITION
                                           TO, AND INTEGRATED WHERE POSSIBLE, INTO
                                           THE OVERALL DESIGN, BUILT FORM AND
                                           LANDSCAPING REQUIREMENTS FOR THE
                                           DEVELOPMENT.
Road technical standards                                                                                  The Development will
PO2                                        No acceptable outcome provided.                                Comply
Road widths and construction within
the development are adequate for
QFES vehicles to gain access to a
safe working area close to buildings
and near water supplies whether or not
on-street parking spaces are occupied.

Editor’s Note—ROADS SHOULD BE
DESIGNED AND CONSTRUCTED
IN ACCORDANCE WITH Road
Planning and Design manual- 2nd
edition.
Table 9.4.8.3
Stormwater Drainage Design
PO1                                                                                                       A stormwater
The development and its                    AO1                                                            management plan has
stormwater management system is            A stormwater management plan is prepared consistent            been prepared
planned and designed having                with PSP6 Engineering Design Standards - Roads,
regard to:                                 drainage and earthworks.
          1.   the natural features of
               the site;
          2. the need to avoid
               impacts and potential
               risks to ecologically
               important areas;
          3. the likely effectiveness
               of erosion and sediment
               control and stormwater
               drainage measures
               during rainfall events
               during and post
               construction; and
the need to protect environmental
values and water quality of receiving
waters both during and post
construction.
PO2                                        AO2.1                                                          The Development will
Stormwater drainage infrastructure is      Stormwater drainage planning, design and construction is in    Comply
planned, designed and constructed to:      accordance with PSP6 Engineering Design Standards -
                                           Roads, drainage and earthworks and the latest version of the
          1.    incorporate allowance      Queensland Urban Drainage Design Manual.
                for increased flood risk
                and tidal inundation       AO2.2
                through pipework as a      The stormwater drainage system connects to a lawful point of
                result of cilmate change   discharge in accordance with PSP6 Engineering Design
                and sea level rise;        Standards - Roads, drainage and earthworks.
           2. ensure the development
                is adequately drained;     AO2.3
                and                        Stormwater flows discharging from the development are
ensure stormwater is managed and           demonstrated to be consistent with pre-development
lawfully discharged without altering       characteristics.
stormwater drainage characteristics
external to the site.                      AO2.4
                                           Development provides for the management of stormwater to



         NMA_ECAR_19323