Skip to the record
Beware of cheap imitations.

Original source · versioned page text

2022_11_17_Ordinary_Meeting_Minutes

of 24

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

ORDINARY MEETING MINUTES                                                    17 NOVEMBER 2022


        Certification of piles condition
        3.    The installation of the piles must be supervised by a licensed cadastral surveyor.
              Certification of the location of the installed piles prepared by a licensed cadastral
              surveyor must be provided to Council.
              The certification must:
              a.     state that the location of the piles is in accordance with the approved plans,
                     and
              b.     be submitted to Council prior to the installation/construction of any other
                     elements of the approved works
        Currency
        4.    This approval lapses where the construction of the jetty extension and pontoons
              have not commenced within 17 November 2028, unless application is made and
              approved by Council for an extension.
        Nature and extent of Use
        5.    All vessels, kayaks and SUPs for hire and all equipment associated with the marine
              use of the facility must wholly moored/stored within the approved lease area, with
              a maximum of 31 vessels at any one time.
        6.    All structures must be constructed wholly within the approved commercial lease
              area as per the approved plans.
        7.    All commercial activities including, the loading and unloading of passengers and
              boat docking is confined to the commercial lease areas of the respective
              commercial operation.
        Structures
        8.    All structures must use materials, natural finishes and colours that blend with the
              surrounding natural landscape.
        9.    Structures must be designed and constructed such that they are free standing
              within the waterway and are not connected to or behind the revetment wall or rock
              wall.
        10.   Structures must be designed and constructed such that they do not place
              additional vertical or lateral loads onto the existing revetment wall that may
              compromise the long term stability and/or durability of the wall. Upon completion
              of works, a certification by RPEQ must be provided to Council in this regard.
        11.   All structures must have no detrimental effects on stormwater drains and/or
              easements.
        12.   No boatlifting devices are to be attached or moored at the structures for the
              purpose of elevating a vessel above the water without Council approval.
        13.   The jetty and deck areas must be constructed in a manner to render the underside
              area vermin proof.
        14.   There must be no electrical reticulation system carrying electricity in excess of 24
              volts beyond the revetment wall unless all switches and power outlets are
              positioned above the 1% AEP flood level.
        15.   Lighting associated with the use must be designed, installed, operated, and
              maintained in accordance with Section 3 of AS4282 Control of the Obtrusive
              Effects of Outdoor Lighting.
        16.   Wastewater and sullage must only be disposed of at approved pump out facilities.
        17.   The mooring facility must not be utilised for live-aboard purposes.

                                                                                  Page 15 of 24
Log in to download the original file

2022_11_17_Ordinary_Meeting_Minutes.pdf · 635 KB (small file)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.