Skip to the record
NoosaWatch™: The source of truth.

Council archive · source document

23616 DA - Change a Development Approval [As Published] · 132003.221132.4

of 94

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

143.

144.

145.

146.

147,

148.

Designs that concentrate stormwater onto adjoining land shail require separate formal
approval from the owner of the land or relevant Government Authority. Such approval
shall be submitted with the design in conjunction with an application for a Development
Permit for Operational Works.

The design plans detailing surface levels, which shall be controlled across the site of
the development to create a major storm event overland flow path system to cater for
the 1:100 year design storm, shall be submitted in conjunction with the Development
Permit for Operational Works. Any overland flow from external catchments shall be
accepted and incorporated in the major event surface flow drainage system through the
site. Overland flows shall be discharged in a safe manner and the product of velocity
time depth shall not exceed 0.4m’/sec.

The design plans are to show how stormwater runoff within and from the site is to be
controlled both during construction and permanently. The plans are to indicate
measures to be taken to prevent erosion and the export of sediment from the site and
will embrace the principals set out in the Institution of Engineers Australia Engineering
Guidelines for Queensland Soil Erosion and Sediment Control, June 1996. Designs
shall also incorporate the principal of “no net increase” in nutrients and other pollutants
from the developed site. This may require the provision of a drainage system that
allows first flush (first 12mm of rainfall) to be collected and treated prior to release into
the drainage system.

An easement for drainage in favour of Council shall be created over the full length and
width of major storm event surface flow paths within the site at no cost to Council. A
dealing number for registration of the easement shall be obtained from the Land Titles
Office before occupation of the site.

Minimum floor level freeboard of 0.5 m shall be provided for habitable and storage
areas above the top water level of the stormwater overland flows.

Details of any proposed estate entrance signage shall be submitted in conjunction with
an application for a Development Permit for Operational Works for either roadwork’s or
landscaping. A $1500 fee shall accompany the application,

The design shall conform to Councils "Signage Policy ~ Development Estate Entrance”.

The proposed names of new roads (public and private) and parks shall be lodged with
the application for a Development Permit for Operational Works.

148.1.Names are to be selected from any of the following categories:-
148.2.Easily pronounced words of Murri Languages.
148.3.Names or words of local significance or historical interest.

148.4. Flora, fauna, industry, topographical, geological’ and similar’ features and terms
relative to the district.

148.5.Sumames of persons of merit or historical significance. (Personal names should
be avoided),

148.6. Approval will not be given to a name that is the same or similar to the name of
another road in the Shire, or of a road in close proximity in a neighbouring Shire.
Names that are not easily pronounced, or may cause confusion to emergency
services are to be avoided.

148.7.All street signs on new roads (public and private) and parks shall be erected prior
to works being accepted on maintenance.

+26 -

Used in these records

About this file

File size
4.4 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

23616 DA - Change a Development Approval [As Published].pdf · 4.4 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.