response to information request Plover St

   7. Provide amended plans detailing (location, depth, pipe size, etc.) the
      existing sewer line in relation to the proposed works.
   8. Provide Unity Water’s approval for the proposed works adjacent and/or
      over the existing sewer line.

The sewer is located in the front of the site and the development does not propose any
construction within 1.5m of the existing infrastructure.




   9. Provide amended plans detailing (location, depth, pipe size, etc.) the
       existing stormwater line in relation to the proposed works.
   10. Provide amended plans showing the creation of an easement over this
       asset in accordance with Noosa Council’s Planning Scheme.

Please find attached advice from TODs consulting engineers in regard to the redundant
stormwater infrastructure on the site. The engineers recommend the old pipes to be
removed as part of the construction works.

   11. Provide details, prepared by a RPEQ (Registered Professional Engineer of
       Queensland), of the proposed earthworks, including, but not limited to:
       extents; volumes; existing and finished levels; cross-sections; batters
       and/or retaining structures; stabilisation methods proposed, etc.

   12. Provide additional detail on the proposed retaining walls. The detail must
       be prepared by a RPEQ and include but not be limited to:

       12.1.  The type of wall construction (material, foundations etc.);
       12.2.  Section plans indicating the location of the walls and foundations in
              relation to the property boundary, the building pad, finished floor
              levels, proposed deck, driveway, etc.;
       12.3. The structures required to collect and convey existing overland
              flows that are impacted on by the construction of the walls;
       12.4. Any fencing to be installed on top of or beside the walls;

                                                                          Page 4 of 5