Project Management Plan

       Tools and equipment must not be taken into the crib rooms;
       Where kitchen facilities have been provided, the area must be cleaned immediately after use and all utensils put away;
       Any food kept in the refrigerators:
              Must be either covered or kept in sealed containers; or
              Will be discarded, along with its container, if found to be mouldy, spoilt or otherwise unfit for human consumption.



4.10.2 Toilets
       Toilets will be cleaned regularly, but workers are expected to use them hygienically and with courtesy for other users;
       Workers should notify a representative of the Principal Contractor where supplies of soap, paper towels or toilet paper are
       depleted; and
       Wash basins must not be used for cleaning plant and equipment. Designated areas and facilities will be provided for this
       (e.g. paint washout areas, concrete pump cleaning, etc.).


4.11 Plant
4.11.1 Power tools
       Cutting and grinding tools must not be used unless guards are fitted and functioning;
       Cutting and grinding discs and blades must be compatible with the tool being used (e.g. maximum rated speed or RPM
       must not be less than the maximum RPM of tool);
       Multi-cutter blades must not be used in angle grinders;
       Free-flight explosive power tools must not be used on site;
       Explosive power tool cartridges and spent cases must be locked away and not disposed of using site waste receptacles and
       facilities; and
       Toxic dust generating power tools must be used with dust suppression (e.g. brick saws, wood saws, petrol saws, concrete
       cutting and grinding equipment, etc.).


4.11.2 Tower cranes
Tower cranes are present on this work site                                                     Yes      No


4.11.3 Loading bays (scaffolding and cantilevered)
Loading bays are in use on this work site                                                      Yes      No
       Any loads placed on loading bays must not exceed the safe working load marked on the bay;
       Materials on loading bays are not to be stacked above the height of the handrails;
       Climbing on to the load above the handrail height is strictly prohibited; and
       Approaching or working adjacent to the exposed edge of the loading bay when the gates are in the open position is strictly
       prohibited unless an approved travel-restraint system is used.


4.11.4 Personnel and materials hoists
Hoists are in use on this work site                                                            Yes      No




WHSMP-C 01/2018.8                                             Initials                                                Page 32 of 39

                                                ____                         ____