07/2398 - SUPERSEDED Negotiated Decision Notice & copy sent to Referral Agencies [As Published] · 132007.2398

                                                                                      2007/2398




100. As Constructed drawings and data shall be certified by a qualified experienced Civil Engineer
     for design intent, and a Licensed Surveyor shall certify the cadastre and the location, level and
     type of all services and structures. All of which shall be submitted to Council for checking and
     for Council’s records.
      The data must fully detail levels for all engineering works including but not limited to
      roadworks, pathway, sewer main, water supply main, finished ground levels and pavement
      surface levels and drainage structures that will become Council asset. The data shall be
      submitted in the Asset Design and As Constructed (ADAC) digital format. (Guidelines on the
      use of ADAC are available at www.adac.com.au).
      Approval of works shall not be granted until all As Constructed information has been supplied
      and accepted by Council.
Waste Management
101. A Waste Management Plan (Operational) generally in accordance with Planning Scheme
     Policy No. 9 “Waste Management Multi-Dwellings and Commercial and Industrial Premises”,
     must be submitted for the day-to-day operation of the development and approved by Council’s
     Health Section prior to issue of development permit for operational works. The Waste
     Management Plan (Operational) is to incorporate the following changes to the proposed
     development:-
      101.1 The proposed general waste bulk bin storage areas at the Aged Care Residence,
            Apartment Building, Village Community Centre and temporary service to the
            Independent Living Units whilst under construction, will require HRV 12.5m length travel
            path and turning access.
      101.2 If the waste storage area at the Aged Care Residence is not roofed, then the actual
            bunded bin wash area is to be decreased in size to a maximum one square metre area.
      101.3 The waste storage area at the Apartment Building is to be relocated to the western end
            of the adjoining car parking spaces, to allow ease of access for collection and avoid the
            unnecessary manoeuvring through this car park.
      101.4 The waste storage areas at the Aged Care Residence, Apartment Building, Village
            Community Centre and temporary service to the Independent Living Units whilst under
            construction, each require their own separate bin wash facility.
      101.5 Submit details for approval of the proposal for bin washing of the recycling bins located
            at the service nodals.
      101.6 Council will not provide a roadside collection service to the 80L and/or 120L general
            waste wheelie bins at the Independent Living Units after their completion. The following
            options must be considered including client costings, and an alternative proposed for
            approval.
             101.6.1   Option 1: Continue the temporary service of the bulk bins as a permanent
                       arrangement. This requires:
                          Details of the permanent waste storage area (location, size, bin wash,
                           etc).
                        HRV 12.5m length travel path and turning access for collection.
                       OR
                       Option 2: Provide a roadside collection service of 240L general waste wheelie
                       bins (one bin shared between two units). This requires:
                          10m vehicle length (not 9m as proposed) travel path and turning access
                           for collection.
                          Where possible bins are to be placed on one side of the road only to
                           prevent duplication of travel path and minimise service time and travel.
                                                                                        13 of 31