Rap Approval · RAP15/0034

                           Plan No.    Rev.   Plan, prepared by                                       Date
                           C1.0        _      Lower Floor Plan prepared by Chris Clout Design         10/09/15
                           C2.0        _      Ground Floor Plan prepared by Chris Clout Design        10/09/15
                           C3.0        _      Upper Floor Plan prepared by Chris Clout Design         10/09/15
                           C4.0        _      Roof Deck Plan prepared by Chris Clout Design           10/09/15
                           C5.0        _      Elevations prepared by Chris Clout Design               10/09/15
                           C6.0        _      Elevations prepared by Chris Clout Design               10/09/15
                           C7.0        _      Section prepared by Chris Clout Design                  10/09/15

                          Building Height
                  3.      The maximum height of the development must not exceed 8 metres above the
                          finished ground level and the natural ground level.
                  4.      Certification must be submitted to Council from a Licensed Surveyor which certifies
                          that the building does not exceed the maximum height and setback requirements of
                          this Decision Notice.
                          Performance Bond
                  5.      Security in the form of a cash bond or trading bank guarantee to the sum of $1500
                          must be submitted to Council, to secure performance of all conditions of this approval,
                          prior to the issue of a Development Permit for Building Works. The cash bond or
                          trading bank guarantee will be returned on performance of the conditions of approval
                          less any costs incurred by Council in respect of enforcing performance of this permit.
                          Council reserves the right to call upon the bond or guaranteed sum to effect
                          compliance with conditions.
                          Landscaping
                  6.      A minimum of 20% of the site must be retained as soft landscaping.
                  7.      Existing trees within road reserves must be retained, except where required to be
                          removed to accommodate the approved dwelling. Any street tree removed for the
                          construction must be replaced along the site’s street frontage.
                  8.      An additional street tree shall be planted along the site’s frontage. The tree is to be a
                          suitable native species of a minimum pot size of 45L and must be suitably maintained
                          and established.
                          Site Access and Driveways
                  9.      A sealed access driveway must be provided from Witta Circle to the car parking area
                          of the development. The works must be undertaken generally in accordance with
                          drawing number 25353-OW2 dated April 2015 prepared by SCG Consulting
                          Engineers and must include:
                          a. a driveway crossover in accordance with IPWEAQ standard drawing SEQ R-050
                          b. a maximum driveway width of 3 metres within the Witta Circle road reserve, and
                          c. grades and headroom clearances in accordance with AS/NZS 2890.1:2004.




                                                                                                           Page 2 of 5


Document Set ID: 19997997
Version: 1, Version Date: 11/12/2015                                                            Print Date: 11 December 2015, 11:47 AM