2016-11-08 S&O Agenda - Item 1, Attachment 1 - Annual Report 2015-16

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                            8 NOVEMBER 2016


          Pavement Design and Construction
    22.   Pavement design for privately owned works must be undertaken in accordance with
          the relevant standards and be designed and constructed to comply with the Disability
          Discrimination Act (DDA), Access to Premises Standard and relevant sections of
          AS1428 Design for access and mobility. Structural integrity of the driveway and car
          park areas will remain the responsibility of the property owner/developer and must be
          certified by an RPEQ.
          Works within Road Reserve and Reinstatement Works
    23.   Safe pedestrian access on all streets in the vicinity of the development must be
          maintained at all times. Should footpath/road closures be necessary to carry out
          construction works, Council’s Engineering Officer must be notified prior to the
          proposed closure and all requirements complied with.
    24.   Where required, any reinstated road pavement must be in accordance with IPWEA
          standard drawing RS-170 with road pavement resurfacing to consist of a minimum
          depth of 50mm of an approved hot mixed asphaltic concrete.
          Earthworks
    25.   All earthworks must be undertaken in accordance with the provisions of AS 3798
          Guidelines on Earthworks for Commercial and Residential Development, with
          geotechnical supervision and testing undertaken in accordance with Section 8 of the
          Standard, and to a minimum of ‘Level 2’ as defined in Appendix B.
    26.   All Earthworks and construction works must be carried out taking into consideration
          the protection of any existing above and below surface services, and the stability and
          protection of fences and any buildings and structures on the adjoining properties.
          Stormwater Drainage
    27.   Works associated with this permit must not adversely impact on the existing drainage
          conditions on other properties including road and public footpath by blocking or
          interfering with overland flow path.
    28.   Construction of all internal stormwater drainage works must comply with the relevant
          section/s of Australian Standard AS/NZS 3500.3.
          Erosion and Sediment Control
    29.   Sediment and erosion control measures must be in place prior to works commencing.
          If such measures are not in place or are not satisfactory, “on the spot” fines may be
          issued. Such fines can be issued if sediments from the site are found to enter or have
          the potential to enter Council’s stormwater system, natural waterways, any
          downstream stormwater filtration system or adversely impacting on other properties.
          The sediment and erosion control design and measures have NOT been approved, it
          is the site's Supervising Engineer who is responsible for ensuring that the sediment
          and erosion control measures have:
          a.   Been duly designed by an RPEQ or CPESC and constructed in accordance
               with "best practise" methods,
          b.   Been revised by an RPEQ or CPESC to address the issues raised by changes
               in the projected construction schedule and/or methods,
          c.   Been revised to address predicted rainfall events, and
          d.   Achieve the desired environmental outcomes.
          Council may request further controls to be installed should the implemented
          measures be found inefficient.



                                                                                 Page 46 of 70