2014-09-25 Ordinary Meeting Minutes

ORDINARY MEETING MINUTES                                                 25 SEPTEMBER 2014


        25.   Buildings and other structures must maintain a minimum clearance of 1.5
              meters from Unitywater sewer mains, and 1.0 meter from a sewer manhole
              chamber or sewer inspection opening.
        26.   Storm water retention systems and gross pollutant traps must maintain a
              minimum clearance of 1.5 meters from Unitywater water supply and sewerage
              infrastructure.
        27.   The applicant must adjust the level of the existing sewerage inspection opening
              as necessary to suit the proposed finished levels. Work must be undertaken by
              Unitywater at the owner’s cost. Where the existing sewerage inspection
              opening point is located within a sealed or concreted parking area, a brass cap
              is required to be fitted.
        28.   Tree plantings must maintain a minimum horizontal clearance of 1.0 metre from
              Unitywater water mains and 1.5 metres from Unitywater sewerage mains.
              Landscaping plants within these clearances must be low growing when mature,
              and suitable approved varieties.
        29.   Construction works undertaken in the vicinity of Unitywater water supply or
              sewerage infrastructure must not adversely affect the integrity of the
              infrastructure. All costs associated with repair, replacement or alteration of
              infrastructure must be met by the applicant.
        ENGINEERING
        External Works
        30.   Nannygai Street must be upgraded for the length of its frontage to the subject
              site. The works must include in particular:
              a.    Construction of a pedestrian footpath in accordance with the conditions of
                    this Decision Notice; and
              b.    Removal of the existing property accesses, stormwater outlet points and
                    reinstatement of the kerb, footpath and verge area to match the balance
                    of the site frontage, including the provision of topsoil and turf where the
                    existing verge is grassed.
              This condition is imposed pursuant to s665 of the Sustainable Planning Act
              2009 being non-trunk infrastructure.
        Site Access and Driveways
        31.   A sealed access driveway must be provided from Nannygai Street to all parking
              and manoeuvring areas of the development. The works must include in
              particular a driveway crossover in accordance with IPWEAQ standard drawing
              SEQ R-051with a maximum width of 6 metres at the property boundary.
        Car Parking
        32.   A minimum of 9 car parking spaces must be provided and marked on the site.
              The works must include crossfalls, gradients and dimensions in accordance
              with Australian Standard AS2890: Parking Facilities
        33.   All vehicles must enter and exit the site in a forward gear.
        Footpath
        34.   A pedestrian and bicycle footpath must be provided for the development. The
              works must include in particular a 2.0 metre wide footpath within the road verge
              for the entire length of the site’s frontage to Nannygai Street. This condition is
              imposed pursuant to s665 of the Sustainable Planning Act 2009 being non-
              trunk infrastructure.


                                                                                 Page 10 of 27