Skip to the record
Accept no substitutions.

Council archive · source document

Development Application Part 2 of 2 - Plan and Site photos - OPW13/0614

of 18

Check the original when the exact wording matters.

Plans and drawings: the text below has words only, no drawings.

Very large file (13.9 MB): may take a few minutes to open.

Log in to see the plans as drawn
Performance outcomes                             Acceptable outcomes                                              Response   Comment

hazardous materials as a result of a            storage of hazardous materials in bulk are designed to:                      hazardous materials.
natural hazard event.                           (1) prevent the intrusion of waters from a defined storm
Editor’s note: Applications should:                 tide event into structures or facilities containing the
                                                    N/Ahazardous materials, or
(1) assess the risk of storm tide inundation    (2) ensure hazardous materials remain secured despite
    releasing or otherwise exposing                 inundation, induding secure from the effects of
    hazardous materials, including
                                                    hydrodynamic forcing associated with wave action or
    appropriate emergency planning and
                                                     flowing water.
    contingency measures.
(2) applications are to be supported by a
    report certified by a Registered
    Professional Engineer of Queensland
    (RPEQ)that demonstrates this
    performance outcome will be achieved.
POS Natural processes and the                   AOS.1 Development in an erosion prone area within the             N/A        These works do not indude development in the coastal
protective function of landforms and             coastal management district:                                                zone.

vegetation are maintained in coastal            (1) maintains vegetation on coastal landforms where its
hazard areas.                                       removal or damage may:
Editor’s note: Applications should be               (a) destabilise the area and increase the potential
supported by a report certified by an RPEQ                for erosion, or
that demonstrates this performance outcome
                                                      (b) interrupt natural sediment trapping processes or
will be achieved.
                                                          dune or land building processes
                                                (2) maintains sediment volumes of dunes and near-shore
                                                     coastal landforms, or where a reduction in sediment
                                                     volumes cannot be avoided, increased risks to
                                                     development from coastal erosion are mitigated by
                                                     location, design, construction and operating
                                                     standards
                                                (3) maintains physical coastal processes outside the
                                                    development footprint for the development, including
                                                    longshore transport of sediment along the coast
                                                (4) reduces the risk of shoreline erosion for areas
                                                    adjacent to the development footprint unless the
                                                    development is an erosion control structure
                                                (5) reduces the risk of shoreline erosion for areas
                                                    adjacent to the development footprint to the
                                                      maximum extent feasible in the case of erosion
                                                     control structures.
                                                AND

                                                AOS.2 Development in a storm tide inundation area is              N/A        These works do not indude development in the coastal
                                                 located, designed, constructed and operated to:                             zone.

                                                (1) maintain dune crest heights, or where a reduction in
                                                     crest heiQhts cannot be avoided, mitiQate risks to




State development assessment provisions                                         Module 10   -
                                                                                             Coastal protection                   21 June 2013                              Page 3 of 15
10.1 Tidal works. or development in a coastal management district state code

Used in these records

About this file

File size
13.9 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Development Application Part 2 of 2 - Plan and Site photos - OPW13_0614.pdf · 13.9 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.