2018-11-15 Ordinary Meeting Minutes

ORDINARY MEETING MINUTES                                              15 NOVEMBER 2018


            The Plan must contain the following information:
            a.    The site area for the storage and separation of waste is to be shown on the
                  plan drawings accompanying the application.
            b.    A waste management table as indicated below is to be completed showing
                  how waste material is to be segregated - recycled – reused or disposed.
            c.    Table – Waste Management Table
                  MATERIALS ON-SITE                          DESTINATION
                                                  Re-use and Recycling           Disposal
             Expected waste     Estimated    On-site          Off-site        *specify
             materials          volume(m³)   *specify         *specify        contractor and
                                             proposed re-use contractor       landfill site or
                                             or on-site       and recycling   other disposal
                                             recycling        outlet          site
                                             methods
             Excavation
             material
             Green waste
             Bricks
             Concrete
             Timber-please
             specify
             Plasterboard
             Metals - please
             specify
             Asbestos
             Other - please
             specify
            Note *If a demolition contractor is undertaking works, then the Waste
            Management table is to be completed by the demolition contractor.
            WASTE
            40.   The developer must provide waste storage and disposal facilities in
                  accordance with Planning Scheme Policy No. 9 "Waste Management Multi-
                  Dwellings and Commercial and Industrial Premises". The facilities must
                  include an external impervious area correctly sized for all refuse and
                  recycling containers and suitably screened from public places and
                  neighbouring properties. A bin wash area is required with a cold-water tap,
                  hose and drain outlet connected to sewer, via a bucket trap. The drain
                  outlet must be designed to prevent storm water entry to the sewerage
                  system. This can be achieved with a nib wall 50mm high and up to 700mm
                  x 700mm wide (max 0.5m2) , or alternatively the waste area can be roofed,
                  or any other design approved by Council.
            41.   Refuse containers must be provided in accordance with the requirements
                  of the Environmental Protection (Interim Waste) Regulation 1996 and
                  (Waste Management) Regulation 2000, for the storage and collection of
                  refuse.
            42.   Bins must be provided throughout the site to reduce littering. All bins
                  provided must be for refuse and recycling and be decanted into the bulk
                  bins by the site operators.
            ENGINEERING
            Site Specific Conditions
            43.   The proposed flood barrier must be of a design that is activated by the

                                                                              Page 26 of 43