2019-12-11 SM Agenda - Item 1 - Attachment 5 - Final New Noosa Plan - Part 1-6 - Clean version

Performance outcomes                                                 Acceptable Outcomes
Site cover and Gross floor area
PO10
Buildings and other roofed structures—                               No acceptable outcome provided
(a)   are of a scale that is compatible with surrounding
      development;
(b)   do not present an appearance of bulk to roads or other
      areas in the vicinity of the site;
(c)   maximise the retention of existing vegetation;
(d)   allow for soft landscaping between buildings and within
      frontages;
(e)   allow for adequate area at ground level for staff amenity;
(f)   facilitates onsite stormwater management and vehicular
      access;
(g)   are in keeping with surrounding development.

Factory Street Business and Industry Precinct
PO11                                                               No acceptable outcome provided
Buildings and other roofed structures for non­industrial uses have
a plot ratio not exceeding 1:1.
Hofmann Drive Business and Industry Precinct
PO12
Buildings and other roofed structures for non­industrial uses have No acceptable outcome provided
a plot ratio not exceeding 0.6:1.
Kin Kin Business and Industry Precinct
PO13
Buildings and other roofed structures for non­industrial uses have No acceptable outcome provided
a plot ratio not exceeding 1:1.
Setbacks
PO14                                                                 AO14
Buildings and other structures are appropriately designed and        Buildings and roofed structures are set back at least—
sited to—
(a)   provide amenity for users of the premises as well as           Road frontage—
      preserve the visual and acoustic amenity of adjoining and      (a)   6 metres to the primary road frontage;
      nearby properties                                              (b)   4.5 metres to the secondary road frontage (where the
(b)   maintain access to views and sunlight;                               premises has frontage to more than one road); and
(c)   provide adequate distance from adjoining land uses;            (c)   10 metres to boundaries that adjoin Walter Hay Drive,
(d)   allow space for required vehicle parking;                            Eumundi Noosa Road, Eenie Creek Road and Holts Road

(e)   preserve any existing vegetation that will buffer the
                                                                     Other boundaries—
      proposed building;
                                                                     (a)   0.0 metres to boundaries that adjoin land in an industry
(f)   allow for landscaping between buildings and within
                                                                           zone;
      frontages to soften buildings, car parking, infrastructure and
      services;                                                      (b)   10 metres to boundaries adjoining a residential zone;

(g)   maintain the visual continuity and pattern of buildings and    (c)   10 metres to boundaries that adjoin Walter Hay Drive,
      landscape elements within the street;                                Eumundi Noosa Road and/or Eenie Creek Road; and

(h)   avoid large areas of continuous wall planes by varying the     (d)   3 metres to any other boundary.
      building setbacks and using appropriate techniques to
      provide visual relief;
(i)   not visually dominate the street or surrounding spaces
(j)   avoid development within the Holts Road setback


Building design and Streetscape                   Table 6.5.1.3 Criteria for assessment (part)

  **FINAL DRAFT ­ Post Consultation 2019**
                                                                                                                              Page 5 of 12