Decision Notice [As Published] · 132009.363

                                                                                           2009/363



33.     Buildings, basements, and other structures must maintain a minimum clearance of 1.0 metre
        from the sewer manhole chamber and 1.0 metre from the sewer house connection point.
        The existing sewer branch and house connection point must comply with this requirement.
34.     All storm water retention systems and gross pollutant traps must maintain a minimum
        clearance of 1.5 metres from Council sewerage infrastructure.
35.     Any landscape planting within 1.5 metres of Council sewerage infrastructure must be
        approved varieties and low growing when mature.
36.     Construction works undertaken in the vicinity of Council water supply or sewerage
        infrastructure must not adversely affect the integrity of the infrastructure. All costs associated
        with repair, replacement or alteration of infrastructure must be met by the applicant.
Earthworks
37.     Earthworks required on site shall be carried out in accordance with Council’s Planning
        Scheme Policy PSP5 – Engineering Design Standards, so as not to cause the additional
        ponding of water on any adjoining lands or the blockage of, or interference with, any natural
        watercourses.
38.     Earthworks carried out on site shall not affect the structural integrity of any of the existing
        fences and/or structures and/or lands that border the development site. Fences that are
        affected shall be replaced prior to the Building Certifier issuing the Certificate of
        Classification. In this regard any fences to be replaced shall be clearly shown on the plans
        submitted for Operational Works approval.
Site Stability
39.     A Geotechnical Engineer or similar qualified expert shall assess the soil condition on site,
        determine the soil classification, establish whether any measures are required to protect the
        stability of adjoining buildings and/or structures and/or land, and make recommendations on
        the type of foundation system(s) best suited for the proposed development. The
        recommendations of this report shall be incorporated into the design and construction of the
        proposed development.
Erosion and Sediment Control
40.     Any person acting on this permit shall prevent erosion and sediment export from leaving the
        site. Site control measures such as silt fencing, controlled gravel access to the site and
        controlled disposal of waste, will be necessary.
        In this regard, plans detailing the methods of controlling erosion and sediment are required
        to be submitted to the Council for approval prior to obtaining a Development Permit for
        Operational Works.
General
41.     A suitably qualified Registered Professional Engineer shall prepare engineering drawings
        and specifications for all engineering works that will become Council infrastructure, which
        shall be submitted in conjunction with an application for a Development Permit for
        Operational Works. In this regard a DXF/DWG file on GDA94 zone 56 grid of the proposed
        cadastre layout is to be submitted in conjunction with any application for Operational Works.
42.     Digital detailed designs including drawings, calculations, specifications etc, shall be
        submitted with any application for a Development Permit for Operational Works in respect of
        roadworks and stormwater drainage works. The design shall be in accordance with Council’s
        Planning Scheme Policy PSP05 – Engineering Design Standards – Roads, Drainage and
        Earthworks. To avoid conflict with underground pipes or services, all existing and proposed
        services required by the development shall be shown on the plans.



                                                                                       Page 6 of 13