2014-06-26 Ordinary Meeting Minutes

ORDINARY MEETING MINUTES                                                           26 JUNE 2014


        Electricity and Telecommunication Services
        23.     Unless otherwise stipulated by telecommunications legislation at the time of
                construction, the development must be provided with all necessary conduits,
                pits and pipes to accommodate the future connection of optic fibre technology
                telecommunications.
        24.     Certification must be submitted to Council from all relevant service providers
                which certifies that the development has met the requirements of this Decision
                Notice and all applicable legislation at the time of construction.
        Earthworks and Retaining Walls
        25.     All fill and associated batters must be undertaken in accordance with an
                Operational Works approval, and contained entirely within the subject site
                unless written permission from the respective landowner(s) is provided to
                Council.
        Damage to Services and Assets
        26.     Any damage caused to existing services and assets as a result of the
                development works must be repaired at no cost to the asset owner at the
                following times:
                (a)   where the damage would cause a hazard to pedestrian or vehicle safety,
                      immediately; or
                (b)   where otherwise, upon completion of the works associated with the
                      development.
                Any repair work which proposes to alter the alignment or level of existing
                services and assets must first be referred to the relevant service authority for
                approval.
        ENVIRONMENT
        Waste Storage
        27.     The developer must provide waste storage and disposal facilities in accordance
                with Planning Scheme Policy 9, Waste Management, including an external
                imperviously paved area correctly sized for all refuse and recycling containers
                and suitably screened from public places and neighboring properties.
        28.     A bin wash area is required with a cold-water tap, hose and drain outlet
                connected to sewer, via a bucket trap. The drain outlet must be designed to
                prevent storm water entry to the sewerage system which can be achieved by a
                bunded area, with a nib wall height of 100mm maximum, enclosing a wash area
                of 700mm x 700mm minimum (max 0.7m²). Alternatively the waste area can be
                roofed, or any other appropriate design approved by council that would prevent
                storm water entry to the sewer.
        Noise
        29.     Written certification is required from a suitably qualified person confirming that
                sound pressure levels from all mechanical plant and equipment comply with the
                following :
                (a)   Air-conditioning and Refrigeration
                         7am to 10pm: Maximum level allowable = background + 5dB(A)
                         10pm to 7am: Maximum level allowable = background + 3dB(A)



                        This is not an official copy of Council’s Minutes
                                                                                   Page 12 of 33